arm | lrzsz移植记录

1 我的使用场景

开发板无网络, 无奈只得用U盘拷贝文件
文件不大, 每次都插拔U盘, 很繁琐
原来的环境不支持rz等命令
就需要移植这个命令来使用

下载地址 https://ohse.de/uwe/releases/lrzsz-0.12.20.tar.gz

2 编译脚本

# 主要内容在这里
configure_for_arm(){mkdir -p $PATH_BUILD_ARM && cd $PATH_BUILD_ARMCFLAGS=-O2 CC=arm-linux-gnueabihf-gcc $PATH_UN_TAR/configure  --prefix=${PATH_INSTALL_ARM}  --host=arm-linux-gnueabihf  --program-prefix=arm-linux-gnueabihf- \--without-profile --without-progs --without-manpages --without-tests# [1] CC=arm-linux-gnueabihf-gcc# [2] --host=arm-linux-gnueabihf# 这里两个都给他指定了,  之前只用了[2], 编译之后再开发板上运行失败# [3] --program-prefix=arm-linux-gnueabihf-# 这个用于生成可执行程序的前缀, 如最终会生成这样的程序arm-linux-gnueabihf-lrz
}

# 完整脚本
#!/bin/bash#COLORS
LOG_WHITE() { echo -e "\033[0m"    "[${FUNCNAME[1]},${BASH_LINENO}] ${@} \033[0m" ;}
LOG_RED()   { echo -e "\033[0;31m" "[${FUNCNAME[1]},${BASH_LINENO}] ${@} \033[0m" ;}
LOG_GREEN() { echo -e "\033[0;32m" "[${FUNCNAME[1]},${BASH_LINENO}] ${@} \033[0m" ;}
LOG_YELLO() { echo -e "\033[0;33m" "[${FUNCNAME[1]},${BASH_LINENO}] ${@} \033[0m" ;}
LOG_BLUE()  { echo -e "\033[0;34m" "[${FUNCNAME[1]},${BASH_LINENO}] ${@} \033[0m" ;}
LOG_PINK()  { echo -e "\033[0;35m" "[${FUNCNAME[1]},${BASH_LINENO}] ${@} \033[0m" ;}
LOG_CYAN()  { echo -e "\033[0;36m" "[${FUNCNAME[1]},${BASH_LINENO}] ${@} \033[0m" ;}errCode=0
errCheck(){errCode=$?if [ $errCode != 0 ];thenLOG_RED $errCodeexit $errCodefi
}PATH_CURR_SCRIPT=$(cd $(dirname $0);pwd -P)      # 当前脚本的路径FILE_TAR_GZ=${PATH_CURR_SCRIPT}/lrzsz-0.12.20.tar.gz
PATH_UN_TAR=${PATH_CURR_SCRIPT}/temp # 解压目录PATH_BUILD_PC=${PATH_UN_TAR}/build_pc
PATH_BUILD_ARM=${PATH_UN_TAR}/build_arm
PATH_INSTALL_PC=${PATH_CURR_SCRIPT}/install_pc
PATH_INSTALL_ARM=${PATH_CURR_SCRIPT}/install_armun_tar_file(){mkdir -p $PATH_UN_TARtar -zxvf $FILE_TAR_GZ -C $PATH_UN_TAR --strip-components 1# --strip-components 1 去掉顶级目录}configure_for_pc(){mkdir -p $PATH_BUILD_PC && cd $PATH_BUILD_PC$PATH_UN_TAR/configure --prefix=${PATH_INSTALL_PC}  
}configure_for_arm(){mkdir -p $PATH_BUILD_ARM && cd $PATH_BUILD_ARMCFLAGS=-O2 CC=arm-linux-gnueabihf-gcc $PATH_UN_TAR/configure  --prefix=${PATH_INSTALL_ARM}  --host=arm-linux-gnueabihf  --program-prefix=arm-linux-gnueabihf- \--without-profile --without-progs --without-manpages --without-tests# [1] CC=arm-linux-gnueabihf-gcc# [2] --host=arm-linux-gnueabihf# 这里两个都给他指定了,  之前只用了[2], 编译之后再开发板上运行失败# [3] --program-prefix=arm-linux-gnueabihf-# 这个用于生成可执行程序的前缀, 如最终会生成这样的程序arm-linux-gnueabihf-lrz
}make_target(){  # [0]-pathcd $1make -j12
}make_install(){ # [0]-pathcd $1make install
}TTY_X=$(($(stty size | awk '{print $2}')-6))                    # determine terminal width
TTY_Y=$(($(stty size | awk '{print $1}')-6))                    # determine terminal height
OPTIONS=$1
if [ -z "$OPTIONS" ]; then                               # 如果输入的参数为空，则进入图形界面，否则为命令行编译OPTIONS=$(whiptail         \--title             "$0"  \--backtitle         "$URL" \--menu              "请选择要运行的指令"  ${TTY_Y} ${TTY_X} 0 \"tar"               "tar -zxvf $FILE_TAR_GZ -C $PATH_UN_TAR --strip-components 1" \"configure_pc"      "为PC端生成配置文件" \"configure_arm"     "为ARM端生成配置文件" \"make_pc"           "编译" \"make_arm"          "编译" \"install_pc"        "安装" \"install_arm"       "安装" \--ok-button "OK"  --cancel-button "Cancel"  \3>&1 1>&2 2>&3)
fi
case $OPTIONS intar)            un_tar_file;;configure_pc)   configure_for_pc;;make_pc)        make_target   $PATH_BUILD_PC  ;;install_pc)     make_install  $PATH_BUILD_PC;;configure_arm)  configure_for_arm;;make_arm)       make_target   $PATH_BUILD_ARM ;;install_arm)    make_install $PATH_BUILD_ARM;;*)              LOG_YELLO "unknow '${OPTIONS}'";;
esac

3 编译步骤

 ./build_configure.sh tar./build_configure.sh configure_arm./build_configure.sh make_arm./build_configure.sh install_arm