ubuntu22.04@Jetson Orin Nano安装配置VNC服务端

1. 源由

最近准备出差，带着Jetson Orin Nano配套的裸奔屏幕，非常不方便。所以打算采用Headless的方式带着主机跑。

要做到这样，当然需要最基本的就是远程登录ssh/vnc。可惜当不接物理屏幕的时候，远程VNC只能看到一个logo。

好吧，谁叫咱们技术出生，搞定了，希望永远别来折腾了，记录下来。

2. 环境

$ uname -a
Linux daniel-nvidia 5.15.122-tegra #1 SMP PREEMPT Mon Dec 18 21:24:25 PST 2023 aarch64 aarch64 aarch64 GNU/Linux$ lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description:    Ubuntu 22.04.4 LTS
Release:        22.04
Codename:       jammy

3. VNC安装

Step 1: update and install xserver-xorg-video-dummy

$ sudo apt update
$ sudo apt install xserver-xorg-video-dummy

Step 2: Create config for dummy virtual display

$ cd /etc/X11
$ sudo vim xorg.conf.dummy

Step3: Add the following contents in xorg.conf.dummy

Note：Resolution 19201080 as example*

Section "Device"Identifier "DummyDevice"Driver "dummy"VideoRam 256000
EndSectionSection "Screen"Identifier "DummyScreen"Device "DummyDevice"Monitor "DummyMonitor"DefaultDepth 24SubSection "Display"Depth 24Modes "1920x1080_60.0"EndSubSection
EndSectionSection "Monitor"Identifier "DummyMonitor"HorizSync 30-70VertRefresh 50-75ModeLine "1920x1080" 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +Hsync +Vsync
EndSection

Step 4: Update /etc/X11/xorg.conf

$ sudo cp xorg.conf xorg.conf.backup
$ sudo cp xorg.conf.dummy xorg.conf

Step 5: Reboot the board

$ sudo reboot

4. 效果

5. 参考资料

【1】Linux 36.2@Jetson Orin Nano之基础环境构建