Brocade G610 配置

配置流程

zone创建–>cfg创建–>ip配置–>cfg启动并保存

查看端口信息

G610:admin> switchshow
switchName:     G610
switchType:     170.5
switchState:    Online   
switchMode:     Native
switchRole:     Principal
switchDomain:   1
switchId:       fffc01
switchWwn:      10:00:38:ba:b0:55:a7:aa
zoning:         OFF
switchBeacon:   OFF
HIF Mode:       OFF
Index Port Address  Media Speed   State       Proto
==================================================0   0   010000   id    N16     Online      FC  F-Port  50:0b:34:20:05:f2:d2:01 1   1   010100   id    N16     Online      FC  F-Port  50:0b:34:20:05:f2:b1:01 2   2   010200   id    N16     Online      FC  F-Port  21:00:f4:c7:aa:0d:9b:7e 3   3   010300   id    N16     Online      FC  F-Port  21:00:f4:c7:aa:0d:9b:92 4   4   010400   id    N16     No_Light    FC  5   5   010500   id    N16     No_Light    FC  6   6   010600   id    N16     No_Light    FC  7   7   010700   id    N16     No_Light    FC  8   8   010800   --    N32     No_Module   FC  (No Ports on Demand license) Disabled9   9   010900   --    N32     No_Module   FC  (No Ports on Demand license) Disabled10  10   010a00   --    N32     No_Module   FC  (No Ports on Demand license) Disabled11  11   010b00   --    N32     No_Module   FC  (No Ports on Demand license) Disabled12  12   010c00   --    N32     No_Module   FC  (No Ports on Demand license) Disabled13  13   010d00   --    N32     No_Module   FC  (No Ports on Demand license) Disabled14  14   010e00   --    N32     No_Module   FC  (No Ports on Demand license) Disabled15  15   010f00   --    N32     No_Module   FC  (No Ports on Demand license) Disabled16  16   011000   --    N32     No_Module   FC  (No Ports on Demand license) Disabled17  17   011100   --    N32     No_Module   FC  (No Ports on Demand license) Disabled18  18   011200   --    N32     No_Module   FC  (No Ports on Demand license) Disabled19  19   011300   --    N32     No_Module   FC  (No Ports on Demand license) Disabled20  20   011400   --    N32     No_Module   FC  (No Ports on Demand license) Disabled21  21   011500   --    N32     No_Module   FC  (No Ports on Demand license) Disabled22  22   011600   --    N32     No_Module   FC  (No Ports on Demand license) Disabled23  23   011700   --    N32     No_Module   FC  (No Ports on Demand license) Disabled

zone配置

G610:admin> zonecreate "MacroSP1-1","1,0"
G610:admin> zonecreate "MacroSP2-1","1,1"
G610:admin> zonecreate "ESXi01","1,0;1,1;1,2"
G610:admin> zonecreate "ESXi02","1,0;1,1;1,3"

格式

<zone创建> “zone名称”,“端口号1;端口号2”

注意:前两行代表端口号以便于后期查找,建议配置

cfg配置

G610:admin> cfgcreate "VMWARE","MacroSP1-1;MacroSP2-1;ESXi01;ESXi02"

格式

<cfg配置> “<cfg名称>”,“;”

cfg保存启用

G610:admin> cfgenable "VMWARE"
You are about to enable a new zoning configuration.
This action will replace the old zoning configuration with the
current configuration selected. If the update includes changes 
to one or more traffic isolation zones, the update may result in  
localized disruption to traffic on ports associated with
the traffic isolation zone changes.
Do you want to enable 'VMWARE' configuration  (yes, y, no, n): [no] YES
sw0 Updating flash ...
2024/05/31-10:25:18, [ZONE-1022], 23, FID 128, INFO, G610, The effective configuration has changed to VMWARE.   
zone config "VMWARE" is in effect
Updating flash ...
G610:admin> cfgsave 
You are about to save the Defined zoning configuration. This
action will only save the changes on Defined configuration.
If the update includes changes to one or more traffic isolation
zones, you must issue the 'cfgenable' command for the changes
to take effect.
Do you want to save the Defined zoning configuration only?  (yes, y, no, n): [no] y
Nothing changed: nothing to save, returning ...

备注

[;]是在[“”]内分隔

[,]是在[“”]外分隔