驱动框架——CMSIS第一部分 RTE驱动框架介绍

一、介绍CMISIS

什么是CMSIS（cortex microcontrol software interface standard一种软件标准接口），官网地址：https://arm-software.github.io/CMSIS_6/latest/General/index.html

包含的core、driver、RTOS、dsp、nn等部分，这些源码文件的编写有的是ARM官方编写，有的是半导体厂商编写，标准是ARM联合这些半导体厂商联合制定的。

二、CMSIS-core部分介绍

一般工程都需要包含CMSIS-core部分文件，包括启动文件，系统初始化文件还有头文件等
启动文件：

系统初始化和一些头文件：

system_stm32f10x.c 

至于其作用，解释几个头文件，stm32f10x.h是stm32f10x系列单片机寄存器定义的头文件，core_cm3.h 是ARM对cortex-M3系列单片机做出的统一标准等，至此就是对CMSIS-core部分的大致介绍。

三、CMSIS RTE框架的介绍

一些重要或者有必要了解的头文件：

RTE_Device.h				管理外设驱动
RTE_Components.h			组件管理

驱动源文件，有的需要配合标准库或者HAL库来使用

里面的函数整合在ARM的CMSIS框架中

以spi为例子Driver_SPI.h中提供的框架

/**
\brief Access structure of the SPI Driver.
*/
typedef struct _ARM_DRIVER_SPI {ARM_DRIVER_VERSION   (*GetVersion)      (void);                             ///< Pointer to \ref ARM_SPI_GetVersion : Get driver version.ARM_SPI_CAPABILITIES (*GetCapabilities) (void);                             ///< Pointer to \ref ARM_SPI_GetCapabilities : Get driver capabilities.int32_t              (*Initialize)      (ARM_SPI_SignalEvent_t cb_event);   ///< Pointer to \ref ARM_SPI_Initialize : Initialize SPI Interface.int32_t              (*Uninitialize)    (void);                             ///< Pointer to \ref ARM_SPI_Uninitialize : De-initialize SPI Interface.int32_t              (*PowerControl)    (ARM_POWER_STATE state);            ///< Pointer to \ref ARM_SPI_PowerControl : Control SPI Interface Power.int32_t              (*Send)            (const void *data, uint32_t num);   ///< Pointer to \ref ARM_SPI_Send : Start sending data to SPI Interface.int32_t              (*Receive)         (      void *data, uint32_t num);   ///< Pointer to \ref ARM_SPI_Receive : Start receiving data from SPI Interface.int32_t              (*Transfer)        (const void *data_out,void *data_in,uint32_t    num);                  ///< Pointer to \ref ARM_SPI_Transfer : Start sending/receiving data to/from SPI.uint32_t             (*GetDataCount)    (void);                             ///< Pointer to \ref ARM_SPI_GetDataCount : Get transferred data count.int32_t              (*Control)         (uint32_t control, uint32_t arg);   ///< Pointer to \ref ARM_SPI_Control : Control SPI Interface.ARM_SPI_STATUS       (*GetStatus)       (void);                             ///< Pointer to \ref ARM_SPI_GetStatus : Get SPI status.
} const ARM_DRIVER_SPI;

在SPI_STM32F10x.c中的使用

// SPI1
#ifdef MX_SPI1
static int32_t        SPI1_Initialize          (ARM_SPI_SignalEvent_t pSignalEvent)                { return SPI_Initialize (pSignalEvent, &SPI1_Resources); }
static int32_t        SPI1_Uninitialize        (void)                                              { return SPI_Uninitialize (&SPI1_Resources); }
static int32_t        SPI1_PowerControl        (ARM_POWER_STATE state)                             { return SPI_PowerControl (state, &SPI1_Resources); }
static int32_t        SPI1_Send                (const void *data, uint32_t num)                    { return SPI_Send (data, num, &SPI1_Resources); }
static int32_t        SPI1_Receive             (void *data, uint32_t num)                          { return SPI_Receive (data, num, &SPI1_Resources); }
static int32_t        SPI1_Transfer            (const void *data_out, void *data_in, uint32_t num) { return SPI_Transfer (data_out, data_in, num, &SPI1_Resources); }
static uint32_t       SPI1_GetDataCount        (void)                                              { return SPI_GetDataCount (&SPI1_Resources); }
static int32_t        SPI1_Control             (uint32_t control, uint32_t arg)                    { return SPI_Control (control, arg, &SPI1_Resources); }
static ARM_SPI_STATUS SPI1_GetStatus           (void)                                              { return SPI_GetStatus (&SPI1_Resources); }void           SPI1_IRQHandler          (void)                                              {        SPI_IRQHandler (&SPI1_Resources); }#ifdef MX_SPI1_TX_DMA_Instancevoid            SPI1_TX_DMA_Handler      (uint32_t events)                                   {        SPI_TX_DMA_Complete (events, &SPI1_Resources); }
#endif
#ifdef MX_SPI1_RX_DMA_Instancevoid            SPI1_RX_DMA_Handler      (uint32_t events)                                   {        SPI_RX_DMA_Complete (events, &SPI1_Resources); }
#endifARM_DRIVER_SPI Driver_SPI1 = {SPIX_GetVersion,SPIX_GetCapabilities,SPI1_Initialize,SPI1_Uninitialize,SPI1_PowerControl,SPI1_Send,SPI1_Receive,SPI1_Transfer,SPI1_GetDataCount,SPI1_Control,SPI1_GetStatus
};
#endif

先记录到这里，这里要注意一个分层次的关系，后续还会引入RTOS依次会设计的层次是软件层->RTOS层->设备层->驱动层->寄存器层。