2021-11-08 51单片机2位秒表启动清零

缘由c51单片机，程序，仿真图，求帮助-编程语言-CSDN问答

#include "REG52.h"sbit K1 = P1^0;
sbit K2 = P1^1;
sbit K3 = P1^2;
sbit K4 = P1^3;
sbit P1_0=P2^0;
sbit P1_1=P2^1;
sbit P1_2=P2^2;
sbit P1_3=P2^3;
sbit P1_4=P2^4;
sbit P1_5=P2^5;
sbit P1_6=P2^6;
sbit P1_7=P2^7;
bit k=1,wk1=0,wk2=0;
unsigned char code SmZiFu[]={63,6,91,79,102,109,125,7,127,111,119,124,57,94,121,113,128,255,64};//0-9A-F.消隐-
unsigned char Js=0,miao=0,fen=0,shi=0,y=6,t=23,ls=0;//中断计时
//unsigned int n=2021;
//void smxs(unsigned char mz,unsigned char w,unsigned char d)
//{
//	unsigned char Xd=0;
//	P1=~255;
//	P1=~(255-(d==1?SmZiFu[mz]:(SmZiFu[mz]|0x80)));//小数点闪烁
//	P2=~w;
//	while(++Xd);
//}
void ZhongDuanSheZhi()
{TH0+=0X4c;/*定时器赋初值，定时50ms触发中断，自动补偿方式*/TL0+=0X00; TMOD=0X01;TR0=1;ET0=1; //开启定时器EA=1; //全局中断开关IT0 = 1;//下降沿触发EX0 = 1;//开外部中断
}
void main()
{unsigned char Xd=0,xz=1,cs=0,ss=0;unsigned int wei=0;P0=1;ZhongDuanSheZhi();k=0;while(1){if(K1==0&&++Xd==0){k=~k;while(!K1);}if(K2==0&&++Xd==0){cs=ss=0;k=~k;while(!K2);}P2=SmZiFu[cs];			P3=SmZiFu[ss];if(Js==20)//设置定时器50毫秒{if(k)if(++ss>9){ss=0;if(++cs>9)cs=0;}Js=0;}}
}
void ZhongDuan() interrupt 1
{++Js;TH0+=0X4c;TL0+=0X00;        
}
void WaiBuZhongDuan0() interrupt 0//外部中断0=0，1=2，引脚P3.2，INT0
{wk1=1; 
}