EDAS投稿系统的遇到的问题及解决办法

问题1：

gutter: Upload failed: The gutter between columns is 0.2 inches wide
(on page 1), but should be at least 0.2 inches

解决：
在\begin{document}前添加\columnsep 0.201 in（0.2in也会报错，建议填大一点点）

问题2：

Upload failed: The top margin is 0.691 in on pages 4 and 5, which is
below the required margin of 0.7 in.

解决：
在对应的4页和5页任意位置处添加 \addtolength{\topmargin}{0.01in}（0.01in为与要求的0.7in的差）

问题3：

bottommargins: Upload failed: The bottom margin is 0.99 in on page 2,
which is below the required margin of 1 in.

解决：
设置整个论文的页边距，在\begin{document}前修改或添加下图红框内容。19行的left，right，top，bottom可以根据报错来确定自己的具体数值。

问题4：

Spacing: Upload failed: The paper has a meian line spacing of 1196 pt,
but should have 12 pt. You may need to increase your font size on page
1, 2, 3,4. 5,6 7 and 8.

解决：
在\begin{document}前添加\renewcommand{\baselinestretch}{1.01}（1.0还是会报错）

---

待补充…

祝各位能少点烦恼，成功上传。