STM32 物联网 4G CAT1 SIMCOM A7680C 源码

基于状态机编写4G模块驱动函数

#include "bsp.h"  
char LTE_TX[512],LTE_RX[512];
int LTE_TX_length,LTE_RX_length;
char U1_TX_data[512],U1_RX_data[512];
char LTE_DATA_buf[512];
char LTE_COM_buf[512];
char LTE_SEND_buf[512];unsigned char U1_TX_flag,U1_RX_flag;
u16 U1_Tx_Counter,U1_Rx_Counter;
char LTE_AT_state;
char LTE_state;
char LTE_SEND0,LTE_SEND1,LTE_SEND2,LTE_SEND3;
char LTE_Connections;														//LTEÁ¬½Ó±êÖ¾    				0£ºÎ´Á¬½Ó  						
char LTE_TEMP_str[32];void UART1_Config(void)
{		GPIO_InitTypeDef GPIO_InitStructure;USART_InitTypeDef USART_InitStructure;NVIC_InitTypeDef   NVIC_InitStructure;DMA_InitTypeDef    DMA_Initstructure;RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_GPIOB | RCC_APB2Periph_GPIOE, ENABLE);RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1 , ENABLE);RCC_AHBPeriphClockCmd(RCC_AHBPeriph_DMA1,ENABLE);RCC_APB1PeriphClockCmd( RCC_APB1Periph_TIM2 , ENABLE); 	
//4G POWER	RCC_APB2PeriphClockCmd( RCC_APB2Periph_GPIOE, ENABLE);GPIO_InitStructure.GPIO_Pin = GPIO_Pin_1;	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;   GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; GPIO_Init(GPIOE, &GPIO_InitStructure);			GPIO_ResetBits(GPIOE, GPIO_Pin_1);  
//4G_PWRKEY	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_3 ;	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;   GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; GPIO_Init(GPIOE, &GPIO_InitStructure);GPIO_SetBits(GPIOE, GPIO_Pin_3);             
//4G_RESET		GPIO_InitStructure.GPIO_Pin = GPIO_Pin_1 ;	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;   GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; GPIO_Init(GPIOB, &GPIO_InitStructure);GPIO_ResetBits(GPIOB, GPIO_Pin_1);    
//4G_RELAY	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8 | GPIO_Pin_9;	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;   GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; GPIO_Init(GPIOE, &GPIO_InitStructure);GPIO_SetBits(GPIOE, GPIO_Pin_8);GPIO_SetBits(GPIOE, GPIO_Pin_9);  /* USART1 GPIO config *//* Configure USART1 Tx (PA.09) as alternate function push-pull */GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;GPIO_Init(GPIOA, &GPIO_InitStructure);    /* Configure USART1 Rx (PA.10) as input floating */GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;GPIO_Init(GPIOA, &GPIO_InitStructure);	/* USART1 mode config */USART_InitStructure.USART_BaudRate = 115200;USART_InitStructure.USART_WordLength = USART_WordLength_8b;USART_InitStructure.USART_StopBits = USART_StopBits_1;USART_InitStructure.USART_Parity = USART_Parity_No ;USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;USART_Init(USART1, &USART_InitStructure);NVIC_InitStructure.NVIC_IRQChannel = USART1_IRQn;     NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1;     NVIC_InitStructure.NVIC_IRQChannelSubPriority=1;     NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;     NVIC_Init(&NVIC_InitStructure);/*uart1 RX DMAÅäÖÃ*/    DMA_Initstructure.DMA_PeripheralBaseAddr =  (u32)(&USART1->DR);    DMA_Initstructure.DMA_MemoryBaseAddr     = (u32)U1_RX_data;    DMA_Initstructure.DMA_DIR = DMA_DIR_PeripheralSRC;    DMA_Initstructure.DMA_BufferSize = 512;    DMA_Initstructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;    DMA_Initstructure.DMA_MemoryInc =DMA_MemoryInc_Enable;    DMA_Initstructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte;    DMA_Initstructure.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte;    DMA_Initstructure.DMA_Mode = DMA_Mode_Normal;    DMA_Initstructure.DMA_Priority = DMA_Priority_High;    DMA_Initstructure.DMA_M2M = DMA_M2M_Disable;    DMA_Init(DMA1_Channel5,&DMA_Initstructure);       //Æô¶¯DMA    DMA_Cmd(DMA1_Channel5,ENABLE);USART_ITConfig(USART1, USART_IT_IDLE, ENABLE);     USART_DMACmd(USART1,USART_DMAReq_Rx,ENABLE);USART_Cmd(USART1, ENABLE);
}struct                                //×÷Òµ²ÉÑù
{    u16 LTE_Head;           u16 LTE_Tail;u16 LTE_Lenght;char LTE_Buf[4][512];int LTE_Len[4];
}LTE_Ring;void LTE_Ring_Init(void)
{LTE_Ring.LTE_Head=0;           LTE_Ring.LTE_Tail=0;LTE_Ring.LTE_Lenght=0;LTE_Ring.LTE_Len[0]=0;LTE_Ring.LTE_Len[1]=0;	LTE_Ring.LTE_Len[2]=0;	LTE_Ring.LTE_Len[3]=0;		
}
unsigned char LTE_Write_Ring(char *data,unsigned int len)
{	if(LTE_Ring.LTE_Lenght >= 4) {return 0;}LTE_Ring.LTE_Len[LTE_Ring.LTE_Tail]=len;memcpy(LTE_Ring.LTE_Buf[LTE_Ring.LTE_Tail],data,len);LTE_Ring.LTE_Tail = (LTE_Ring.LTE_Tail+1)%4;LTE_Ring.LTE_Lenght++;return 1;
}
unsigned char LTE_Read_Ring(char *Data)
{int len;if(LTE_Ring.LTE_Lenght == 0){return 0;}len=LTE_Ring.LTE_Len[LTE_Ring.LTE_Head];memcpy(Data,LTE_Ring.LTE_Buf[LTE_Ring.LTE_Head],len);memset(LTE_Ring.LTE_Buf[LTE_Ring.LTE_Head],0,len);LTE_Ring.LTE_Len[LTE_Ring.LTE_Head]=0;LTE_Ring.LTE_Head = (LTE_Ring.LTE_Head+1)%4;LTE_Ring.LTE_Lenght--;return len;
}struct                                //×÷Òµ²ÉÑù
{    u16 LTE_Head;           u16 LTE_Tail;u16 LTE_Lenght;char LTE_Buf[4][512];int LTE_Len[4];
}LTE1_T_Ring;
void LTE1_T_Ring_Init(void)
{LTE1_T_Ring.LTE_Head=0;           LTE1_T_Ring.LTE_Tail=0;LTE1_T_Ring.LTE_Lenght=0;LTE1_T_Ring.LTE_Len[0]=0;LTE1_T_Ring.LTE_Len[1]=0;	LTE1_T_Ring.LTE_Len[2]=0;	LTE1_T_Ring.LTE_Len[3]=0;		
}
unsigned char LTE1_T_Write_Ring(char *data,unsigned int len)
{	if(LTE1_T_Ring.LTE_Lenght >= 4) {return 0;}LTE1_T_Ring.LTE_Len[LTE1_T_Ring.LTE_Tail]=len;memcpy(LTE1_T_Ring.LTE_Buf[LTE1_T_Ring.LTE_Tail],data,len);LTE1_T_Ring.LTE_Tail = (LTE1_T_Ring.LTE_Tail+1)%4;LTE1_T_Ring.LTE_Lenght++;return 1;
}
unsigned char LTE1_T_Read_Ring(char *Data)
{int len;if(LTE1_T_Ring.LTE_Lenght == 0){return 0;}len=LTE1_T_Ring.LTE_Len[LTE1_T_Ring.LTE_Head];memcpy(Data,LTE1_T_Ring.LTE_Buf[LTE1_T_Ring.LTE_Head],len);memset(LTE1_T_Ring.LTE_Buf[LTE1_T_Ring.LTE_Head],0,len);LTE1_T_Ring.LTE_Len[LTE1_T_Ring.LTE_Head]=0;LTE1_T_Ring.LTE_Head = (LTE1_T_Ring.LTE_Head+1)%4;LTE1_T_Ring.LTE_Lenght--;return len;
}
struct                                //×÷Òµ²ÉÑù
{    u16 LTE_Head;           u16 LTE_Tail;u16 LTE_Lenght;char LTE_Buf[4][512];int LTE_Len[4];
}LTE2_T_Ring;
void LTE2_T_Ring_Init(void)
{LTE2_T_Ring.LTE_Head=0;           LTE2_T_Ring.LTE_Tail=0;LTE2_T_Ring.LTE_Lenght=0;LTE2_T_Ring.LTE_Len[0]=0;LTE2_T_Ring.LTE_Len[1]=0;	LTE2_T_Ring.LTE_Len[2]=0;	LTE2_T_Ring.LTE_Len[3]=0;		
}
unsigned char LTE2_T_Write_Ring(char *data,unsigned int len)
{	if(LTE2_T_Ring.LTE_Lenght >= 4) {return 0;}LTE2_T_Ring.LTE_Len[LTE2_T_Ring.LTE_Tail]=len;memcpy(LTE2_T_Ring.LTE_Buf[LTE2_T_Ring.LTE_Tail],data,len);LTE2_T_Ring.LTE_Tail = (LTE2_T_Ring.LTE_Tail+1)%4;LTE2_T_Ring.LTE_Lenght++;return 1;
}
unsigned char LTE2_T_Read_Ring(char *Data)
{int len;if(LTE2_T_Ring.LTE_Lenght == 0){return 0;}len=LTE2_T_Ring.LTE_Len[LTE2_T_Ring.LTE_Head];memcpy(Data,LTE2_T_Ring.LTE_Buf[LTE2_T_Ring.LTE_Head],len);memset(LTE2_T_Ring.LTE_Buf[LTE2_T_Ring.LTE_Head],0,len);LTE2_T_Ring.LTE_Len[LTE2_T_Ring.LTE_Head]=0;LTE2_T_Ring.LTE_Head = (LTE2_T_Ring.LTE_Head+1)%4;LTE2_T_Ring.LTE_Lenght--;return len;
}
struct                                //×÷Òµ²ÉÑù
{    u16 LTE_Head;           u16 LTE_Tail;u16 LTE_Lenght;char LTE_Buf[4][512];int LTE_Len[4];
}LTE3_T_Ring;
void LTE3_T_Ring_Init(void)
{LTE3_T_Ring.LTE_Head=0;           LTE3_T_Ring.LTE_Tail=0;LTE3_T_Ring.LTE_Lenght=0;LTE3_T_Ring.LTE_Len[0]=0;LTE3_T_Ring.LTE_Len[1]=0;	LTE3_T_Ring.LTE_Len[2]=0;	LTE3_T_Ring.LTE_Len[3]=0;		
}
unsigned char LTE3_T_Write_Ring(char *data,unsigned int len)
{	if(LTE3_T_Ring.LTE_Lenght >= 4) {return 0;}LTE3_T_Ring.LTE_Len[LTE3_T_Ring.LTE_Tail]=len;memcpy(LTE3_T_Ring.LTE_Buf[LTE3_T_Ring.LTE_Tail],data,len);LTE3_T_Ring.LTE_Tail = (LTE3_T_Ring.LTE_Tail+1)%4;LTE3_T_Ring.LTE_Lenght++;return 1;
}
unsigned char LTE3_T_Read_Ring(char *Data)
{int len;if(LTE3_T_Ring.LTE_Lenght == 0){return 0;}len=LTE3_T_Ring.LTE_Len[LTE3_T_Ring.LTE_Head];memcpy(Data,LTE3_T_Ring.LTE_Buf[LTE3_T_Ring.LTE_Head],len);memset(LTE3_T_Ring.LTE_Buf[LTE3_T_Ring.LTE_Head],0,len);LTE3_T_Ring.LTE_Len[LTE3_T_Ring.LTE_Head]=0;LTE3_T_Ring.LTE_Head = (LTE3_T_Ring.LTE_Head+1)%4;LTE3_T_Ring.LTE_Lenght--;return len;
}
void USART1_IRQHandler(void)
{unsigned int i,j;char *buf;if(USART_GetITStatus(USART1,USART_IT_IDLE) == SET)     {                                                 USART1->SR;        USART1->DR;DMA_Cmd(DMA1_Channel5,DISABLE);                        U1_Rx_Counter = 512 - DMA_GetCurrDataCounter(DMA1_Channel5);        if(buf=strstr(U1_RX_data, "RECV FROM:")){if(buf=strstr(U1_RX_data, "114.116.6.187:10000")){if(buf=strstr(U1_RX_data, "+IPD")){for(i=0;i<512;i++){if(buf[i]==0x0d){if((buf[25]==0x70)&&(buf[26]==0x01)&&(buf[29]==0x01))  //+2µÚÒ»¸ö×Ö½Ú{for(j=0;j<30;j++){LTE_IP[j]=buf[j+32];}LTE_PORT=(buf[62]<<8)+buf[63];for(j=0;j<4;j++){local_ip[j]=buf[j+64];}for(j=0;j<4;j++){mask_ip[j]=buf[j+68];}for(j=0;j<4;j++){gateway_ip[j]=buf[j+72];}for(j=0;j<32;j++){Lorawan_EUI[j]=buf[j+83];}for(j=0;j<32;j++){Lorawan_DevAddr[j]=buf[j+115];}LTE_Connections=1;}if((buf[25]==0x70)&&(buf[26]==0x01)&&(buf[29]==0x00)){LTE_Connections=0;}break;}}}				}if(buf=strstr(U1_RX_data, "114.116.6.187:20000")){if(buf=strstr(U1_RX_data, "+IPD")){for(i=0;i<512;i++){if(buf[i]==0x0d){if(i==5)UART2_T_Write_Ring((buf+7),(buf[4]-0x30));//1×Ö½Úif(i==6)UART2_T_Write_Ring((buf+8),(((buf[4]-0x30)*10)+(buf[5]-0x30)));//2×Ö½Úif(i==7)UART2_T_Write_Ring((buf+9),(((buf[4]-0x30)*100)+((buf[5]-0x30)*10)+(buf[6]-0x30)));//3×Ö½Úif(i==8)UART2_T_Write_Ring((buf+10),(((buf[4]-0x30)*1000)+((buf[5]-0x30)*100)+((buf[6]-0x30)*10)+(buf[7]-0x30)));//4×Ö½Úbreak;}}	}}if(buf=strstr(U1_RX_data, "114.116.6.187:30000")){if(buf=strstr(U1_RX_data, "+IPD")){for(i=0;i<512;i++){if(buf[i]==0x0d){if(i==5)UART3_T_Write_Ring((buf+7),(buf[4]-0x30));//1×Ö½Úif(i==6)UART3_T_Write_Ring((buf+8),(((buf[4]-0x30)*10)+(buf[5]-0x30)));//2×Ö½Úif(i==7)UART3_T_Write_Ring((buf+9),(((buf[4]-0x30)*100)+((buf[5]-0x30)*10)+(buf[6]-0x30)));//3×Ö½Úif(i==8)UART3_T_Write_Ring((buf+10),(((buf[4]-0x30)*1000)+((buf[5]-0x30)*100)+((buf[6]-0x30)*10)+(buf[7]-0x30)));//4×Ö½Úbreak;}}	}}if(buf=strstr(U1_RX_data, "114.116.6.187:40000")){if(buf=strstr(U1_RX_data, "+IPD")){for(i=0;i<512;i++){if(buf[i]==0x0d){if(i==5)UART5_T_Write_Ring((buf+7),(buf[4]-0x30));//1×Ö½Úif(i==6)UART5_T_Write_Ring((buf+8),(((buf[4]-0x30)*10)+(buf[5]-0x30)));//2×Ö½Úif(i==7)UART5_T_Write_Ring((buf+9),(((buf[4]-0x30)*100)+((buf[5]-0x30)*10)+(buf[6]-0x30)));//3×Ö½Úif(i==8)UART5_T_Write_Ring((buf+10),(((buf[4]-0x30)*1000)+((buf[5]-0x30)*100)+((buf[6]-0x30)*10)+(buf[7]-0x30)));//4×Ö½Úbreak;}}		}}}else{LTE_Write_Ring(U1_RX_data,U1_Rx_Counter);}DMA1_Channel5->CNDTR = 512;                                    DMA_Cmd(DMA1_Channel5,ENABLE);                       }
}
void U1_SendString(char *buf1)		  
{unsigned int i;unsigned int len;len=strlen(buf1);for(i=0;i<len;i++){while(USART_GetFlagStatus(USART1,USART_FLAG_TC)== RESET);USART_SendData(USART1,buf1[i]);}
}
void USART1_Send(char *buf,unsigned int len)
{unsigned int i;for(i=0;i<len;i++){while(USART_GetFlagStatus(USART1,USART_FLAG_TC)== RESET);USART_SendData(USART1,buf[i]);}
}
void LED1_OPEN(void)
{GPIO_WriteBit(GPIOE, GPIO_Pin_13, Bit_SET);
}
void LED1_CLOSE(void)
{GPIO_WriteBit(GPIOE, GPIO_Pin_13, Bit_RESET);
}
void LTE_ATTR(int time1,int time2,int time3,char * buf1,char * buf2,char * buf3,char * buf4,char * buf5,char * buf6,char r ,char w)
{unsigned int len;switch(LTE_AT_state){case state_idle:if(LTE_Delay_Timer>time1){LTE_Delay_Timer=0;LTE_Timeslimite++;len=strlen(buf1);USART1_Send(buf1,len);LTE_AT_state=state_run;}break;case state_run:LED1_OPEN();LTE_Delay_Timer=0;if(LTE_Read_Ring(LTE_DATA_buf)>0){if((strstr(LTE_DATA_buf, buf2))&&(strlen(buf2)))  //×Ö·û´®±È½Ï²»ÄÜÓÐ00£¬¹Ø±Õ»ØÏÔ±ÜÃâÊý¾ÝÖеÄ00Ó°Ïì±È½Ï{LTE_AT_state=state_right; }else if((strstr(LTE_DATA_buf, buf3))&&(strlen(buf3))){LTE_AT_state=state_right; } else if((strstr(LTE_DATA_buf, buf4))&&(strlen(buf4))){LTE_AT_state=state_wrong; }else if((strstr(LTE_DATA_buf, buf5))&&(strlen(buf5))){LTE_AT_state=state_wrong; } else if((strstr(LTE_DATA_buf, buf6))&&(strlen(buf6))){LTE_AT_state=state_wrong; }}if(LTE_Timeslimite>time2){LTE_AT_state=state_wrong;}if(LTE_overtime>time3){LTE_AT_state=state_wrong;}break;case state_right:LTE_state=r;LTE_AT_state=state_idle;LTE_Delay_Timer=0;LTE_overtime=0;LTE_Timeslimite=0;LED1_CLOSE();memset(LTE_DATA_buf,0,512);break;case state_wrong:LTE_state=w;LTE_AT_state=state_idle;LTE_Delay_Timer=0;LTE_overtime=0;LTE_Timeslimite=0;LED1_CLOSE();memset(LTE_DATA_buf,0,512);break;default:  break;}
}
void LTE_DATATR(int time1,int time2,int time3,char * buf1,int len,char * buf2,char * buf3,char * buf4,char * buf5,char * buf6,char r ,char w)
{switch(LTE_AT_state){case state_idle:if(LTE_Delay_Timer>time1){LTE_Delay_Timer=0;LTE_Timeslimite++;USART1_Send(buf1,len);LTE_AT_state=state_run;}break;case state_run:LED1_OPEN();LTE_Delay_Timer=0;if(LTE_Read_Ring(LTE_DATA_buf)>0){if((strstr(LTE_DATA_buf, buf2))&&(strlen(buf2)))   //×Ö·û´®±È½Ï²»ÄÜÓÐ00£¬¹Ø±Õ»ØÏÔ±ÜÃâÊý¾ÝÖеÄ00Ó°Ïì±È½Ï{LTE_AT_state=state_right; }else if((strstr(LTE_DATA_buf, buf3))&&(strlen(buf3))){LTE_AT_state=state_right; } else if((strstr(LTE_DATA_buf, buf4))&&(strlen(buf4))){LTE_AT_state=state_wrong; }else if((strstr(LTE_DATA_buf, buf5))&&(strlen(buf5))){LTE_AT_state=state_wrong; } else if((strstr(LTE_DATA_buf, buf6))&&(strlen(buf6))){LTE_AT_state=state_wrong; }}if(LTE_Timeslimite>time2){LTE_AT_state=state_wrong;}if(LTE_overtime>time3){LTE_AT_state=state_wrong;}break;case state_right:LTE_state=r;LTE_AT_state=state_idle;LTE_Delay_Timer=0;LTE_overtime=0;LTE_Timeslimite=0;LED1_CLOSE();memset(LTE_DATA_buf,0,512);break;case state_wrong:LTE_state=w;LTE_AT_state=state_idle;LTE_Delay_Timer=0;LTE_overtime=0;LTE_Timeslimite=0;LED1_CLOSE();memset(LTE_DATA_buf,0,512);break;default:  break;}
}
void LTE_POWER(void)
{int i,j;GPIO_WriteBit(GPIOE, GPIO_Pin_1, Bit_SET);for(i=0;i<1000;i++)for(j=0;j<1000;j++);GPIO_WriteBit(GPIOE, GPIO_Pin_1, Bit_RESET);for(i=0;i<1000;i++)for(j=0;j<1000;j++);
}
void LTE_KEY(void)
{int i,j;GPIO_WriteBit(GPIOE, GPIO_Pin_3, Bit_RESET);for(i=0;i<1000;i++)for(j=0;j<1000;j++);GPIO_WriteBit(GPIOE, GPIO_Pin_3, Bit_SET);for(i=0;i<1000;i++)for(j=0;j<1000;j++);
}
void LTE_RST(void)
{int i,j;GPIO_WriteBit(GPIOB, GPIO_Pin_1, Bit_RESET);for(i=0;i<1000;i++)for(j=0;j<1000;j++);GPIO_WriteBit(GPIOB, GPIO_Pin_1, Bit_SET);for(i=0;i<1000;i++)for(j=0;j<1000;j++);
}/*********************************************END OF FILE**********************/

.h文件

#ifndef __BSP_UART1_H
#define	__BSP_UART1_Hvoid UART1_Config(void);
void LTE_Ring_Init(void);
unsigned char LTE_Write_Ring(char *data,unsigned int len);
unsigned char LTE_Read_Ring(char *Data);
void LTE1_T_Ring_Init(void);
unsigned char LTE1_T_Write_Ring(char *data,unsigned int len);
unsigned char LTE1_T_Read_Ring(char *Data);
void LTE2_T_Ring_Init(void);
unsigned char LTE2_T_Write_Ring(char *data,unsigned int len);
unsigned char LTE2_T_Read_Ring(char *Data);
void LTE3_T_Ring_Init(void);
unsigned char LTE3_T_Write_Ring(char *data,unsigned int len);
unsigned char LTE3_T_Read_Ring(char *Data);
void U1_SendString(char *buf1);
void USART1_Send(char *buf,unsigned int len);
void LED1_OPEN(void);
void LED1_CLOSE(void);
void LTE_ATTR(int time1,int time2,int time3,char * buf1,char * buf2,char * buf3,char * buf4,char * buf5,char * buf6,char r ,char w);
void LTE_DATATR(int time1,int time2,int time3,char * buf1,int len,char * buf2,char * buf3,char * buf4,char * buf5,char * buf6,char r ,char w);
void LTE_POWER(void);
void LTE_KEY(void);
void LTE_RST(void);
#endif /* __BSP_UART1_H */