在Ubuntu或linux中为coreutils工具包的cp和mv命令添加进度条

1、查看当前最新的coreutils版本：

http://ftp.gnu.org/gnu/coreutils/

2、安装coreutils过程
# wget http://ftp.gnu.org/gnu/coreutils/coreutils-9.4.tar.xz
# tar -xJf coreutils-9.4.tar.xz
# cd coreutils-9.4/

对照上面的，下载对应coreutils版本的advcpmv版本。

https://github.com/jarun/advcpmv
# wget https://raw.githubusercontent.com/jarun/advcpmv/master/advcpmv-0.9-9.4.patch

# patch -p1 -i advcpmv-0.9-9.4.patch
# ./configure FORCE_UNSAFE_CONFIGURE=1

configure: creating ./config.status
config.status: creating Makefile
config.status: creating po/Makefile.in
config.status: creating gnulib-tests/Makefile
config.status: creating lib/config.h
config.status: executing depfiles commands
config.status: executing po-directories commands
config.status: creating po/POTFILES
config.status: creating po/Makefile

# make

make[4]: Leaving directory '/root/coreutils-9.4/gnulib-tests'
make[3]: Leaving directory '/root/coreutils-9.4/gnulib-tests'
make[2]: Leaving directory '/root/coreutils-9.4/gnulib-tests'
make[1]: Leaving directory '/root/coreutils-9.4'
注：直接编译会出错，需要增加FORCE_UNSAFE_CONFIGURE=1 参数配置。

checking whether mknod can create fifo without root privileges... configure: error: in '/root/coreutils-9.4':
configure: error: you should not run configure as root (set FORCE_UNSAFE_CONFIGURE=1 in environment to bypass this check)
See 'config.log' for more details

替代当前系统命令，有必要可以先备份一下原来的，替换测试后，再将原有版本删除。

$ sudo cp src/cp /usr/local/bin/cp
$ sudo cp src/mv /usr/local/bin/mv

接着我们只需要在使用cp和mv命令的时候加上-g参数就可以显示进度条了。

为了方便起见我们可以在.bashrc文件中设置alias
alias cp='cp -ig'
alias mv='mv -ig'

至此，完成。