IJCAI 2024 International Joint Conference on Artificial Intelligence
目录
- 1、 重要
- 1.1 官网:
- 1.2 提交网址:
- 1.3 模板 (latex & word)
- 2、 Call for Papers
- 2.1 Important Dates
- 2.2 Details
- 3、 注意事项
- 4 New in 2024
- 5 Simplified procedure for resubmission information
- 6、 Submission Process 提交流程
- 6.1 Formatting guidelines:
- 6.2 Submission site:
- 6.3 Mandatory abstract submission
- 6.4 Author Information
- 7、 Supplementary material
- 8、 Preprints (arXiv)
- 9、 Conference Committee
- 10、 Program Committee
1、 重要
1.1 官网:
https://ijcai24.org/ 链接
1.2 提交网址:
https://cmt3.research.microsoft.com/IJCAI2024 链接
1.3 模板 (latex & word)
https://www.ijcai.org/authors_kit 链接
2、 Call for Papers
2.1 Important Dates
(all times are Anywhere On Earth, UTC-12)
- Abstract submission deadline: **January 10, 2024 **
- Author information deadline: January 16, 2024
- Full paper submission deadline: January 17, 2024
- Appendix and resubmission information deadline: January 24, 2024
- Summary reject notification: February 22, 2024
- Author response period: March 18-21, 2024
- Paper notification: April 16, 2024
- Conference: Saturday, August 3rd to Friday, August 9th, 2024.
重要日期(所有时间均为地球任何地方时间,UTC-12)
- 摘要提交 截止日期:**2024年1月10日 **
- 作者信息提交截止日期:2024年1月16日
- 全文提交截止日期:2024年1月17日
- 附录和重新提交信息截止日期:2024年1月24日
- 摘要拒绝通知:2024年2月22日
- 作者回复期:2024年3月18日至21日
- 论文通知:2024年4月16日
- 会议时间:2024年8月3日(星期六)至8月9日(星期五)
2.2 Details
Submissions are invited for the 33rd International Joint Conference on Artificial Intelligence, which is planned to be held in Jeju Island, South Korea, from August 3rd to August 9th, 2024. Since 1969, IJCAI has remained the premier conference bringing together the international AI community to communicate the advances and achievements of artificial intelligence research.
In addition to the main track, the authors will be able to submit papers to the three special tracks (AI for Good , AI the Arts and Creativity, and Human-Centred AI), as well as the survey track; these tracks will post their calls for papers later this year, and their deadlines, procedures and policies may differ from what is described below.
Submissions to IJCAI 2024 should report significant, original, and previously unpublished results on any aspect of artificial intelligence. Papers on novel AI research problems, AI techniques for novel application domains, and papers that cross discipline boundaries within AI are especially encouraged.
A selection of the best papers submitted to IJCAI 2024 will be invited for a fast track in the Artificial Intelligence Journal and/or the Journal of AI Research.
诚邀提交文章参加第33届国际人工智能联合会议(International Joint Conference on Artificial Intelligence,IJCAI),该会议计划于2024年8月3日至8月9日在韩国济州岛举行。自1969年以来,IJCAI一直是首屈一指的会议,汇聚国际人工智能社区,交流人工智能研究的进展和成就。
除了主要论坛之外,作者们还可以向三个特别论坛(AI for Good,AI the Arts and Creativity,以及 Human-Centred AI)和调研论坛提交论文;这些论坛将于今年晚些时候发布论文征集通知,其截止日期、程序和政策可能与以下描述的不同。
提交给IJCAI 2024的文章应报道人工智能任何方面的重要、原创和未曾发表的成果。特别鼓励提交关于新颖人工智能研究问题、新应用领域的人工智能技术以及跨越人工智能学科边界的论文。
3、 注意事项
-
Papers must be no longer than 9 pages in total: 7 pages for the body of the paper and 2 pages for references.
-
All authors must provide author information. All authors are expected to be available to review.
-
Two-phase reviewing:
- Every paper will receive two reviews in Phase 1.
- Papers not rejected in Phase 1 will receive additional reviews in Phase 2 and will be able to provide an author’s response.
-
Supplementary material (e.g. appendices, data, source code, resubmission information) is due one week after the paper deadline.
-
Paper resubmissions from other conferences are welcome but authors are required to provide resubmission information, as described below.
-
论文总页数不得超过**9页:论文正文部分为7页**,参考文献部分为2页。
-
所有作者必须提供作者信息。期望所有作者都能进行审阅。
-
两阶段审阅:
- 每篇论文在第一阶段将收到两份审阅。
- 在第一阶段未被拒绝的论文将在第二阶段接受额外审阅,并有机会提供作者回复。
-
补充资料(例如附录、数据、源代码、重新提交信息)需在**论文截止日期后一周**提交。
-
欢迎从其他会议重新提交论文,但作者需要提供重新提交的相关信息,如下所述。
4 New in 2024
Generative AI models, including Chat-GPT, BARD, LLaMA, or similar LLMs, do not satisfy the criteria for authorship of papers published in IJCAI 2024. If authors use an LLM in any part of the paper-writing process they assume full responsibility for all content, including checking for plagiarism and correctness of all text.
We encourage papers that describe research on or involving LLMs. Text generated by an LLM as part of the paper’s methodology or experimental analysis is allowed but needs to be properly documented and described in the paper.
生成式人工智能模型,包括Chat-GPT、BARD、LLaMA或类似的语言生成模型,不符合IJCAI 2024发表论文的作者资格标准。如果作者在论文撰写过程中使用了语言生成模型,包括但不限于LLM,他们需对所有内容负全部责任,包括检查抄袭和文本正确性。
我们鼓励提交描述与语言生成模型相关的研究的论文。作为论文方法论或实验分析的一部分所生成的文本是允许的,但需要在论文中进行适当的记录和描述。
5 Simplified procedure for resubmission information
Authors must declare whether their paper has been rejected from another peer-reviewed conference in the last 12 months before the submission. They will be requested to upload the latest rejected version (anonymized if necessary) with the reviewer’s comments; a cover letter responding to the reviews is optional. To avoid bias, the resubmission information will only be made available to reviewers after they submit their reviews. The program committee reserves the right to reject papers that fail to report resubmission information. Further, reviewers will be encouraged to check whether the resubmission addresses factual issues pointed out in the reviews of the previous version (e.g., typos, incorrect attribution of results, etc.) and to reject submissions that fail to do so.
重新提交信息的简化流程:
作者必须声明他们的论文在提交之前的最近12个月内是否被另一个同行评审的会议拒绝过。他们将被要求上传最新被拒绝的版本(必要时匿名化)以及审稿人的评论;回复审稿意见的附信是可选的。为避免偏见,重新提交信息只会在审稿人提交审稿意见后提供给他们。程序委员会保留拒绝未报告重新提交信息的论文的权利。此外,审稿人将被鼓励检查重新提交的论文是否解决了前一个版本审稿中指出的事实问题(例如,拼写错误、结果错误归因等),并拒绝未能解决这些问题的提交。
6、 Submission Process 提交流程
6.1 Formatting guidelines:
The updated LaTeX styles and Word template will be available at
- https://www.ijcai.org/authors_kit 1
in December 2023
6.2 Submission site:
https://cmt3.research.microsoft.com/IJCAI2024 2
6.3 Mandatory abstract submission
The paper title, author names, contact details, and a brief abstract must be submitted electronically through the IJCAI 2024 paper submission site (link above) by the abstract submission deadline. It will be possible to make minor edits to the title and abstract until the full paper submission deadline. However, submissions with “placeholder” abstracts may be removed without consideration.
论文标题、作者姓名、联系方式以及简要摘要必须在摘要提交截止日期前通过IJCAI 2024论文提交网站(上方链接)进行电子提交。可以在全文提交截止日期之前对标题和摘要进行轻微编辑。然而,带有“占位符”摘要的提交可能会被删除而不予考虑。
6.4 Author Information
Full papers must be submitted through the same site by the paper submission deadline. The list of author names provided at the Author Information Deadline is final. Authors may not be added to or removed from papers following submission. (The author’s ordering may still be changed during the camera-ready period.) All authors must fill out the author information form in the submission site by the Author Information deadline. The author’s information is important to control the COIs in the review process. A submission may be rejected without review if any co-author does not register and enter the necessary information.
全文必须在论文提交截止日期前通过同一网站提交。在作者信息截止日期提供的作者名单是最终的,提交后不得添加或删除作者(作者顺序在最终版本阶段仍可更改)。
所有作者必须在作者信息截止日期之前在提交网站上填写作者信息表。
作者的信息对于控制评审过程中的利益冲突非常重要。如果任何共同作者未注册或输入必要信息,则可能会导致提交被拒绝而不进行审查。
7、 Supplementary material
Authors may submit up to 50MB of supplementary material, such as appendices, proofs, derivations, data, or source code; all supplementary material must be in PDF or ZIP format.
Supplementary material should be created by the authors that directly support the submission content. Like submissions, supplementary material must be anonymized.
There are two entries for supplementary files in the CMT system: one is “TechnicalAppendix”, and the other one is “ResubmissionFile”. The latter should be used for providing resubmission information only. Looking at the technical appendix is at the discretion of the reviewers.
作者可以提交多达50MB的补充资料,例如附录、证明、推导、数据或源代码;所有补充资料必须以PDF或ZIP格式呈现。
补充资料应由作者创建,直接支持提交内容。与提交内容一样,补充资料必须进行匿名化处理。
在CMT系统中有两个补充文件的条目:一个是“TechnicalAppendix”,另一个是“ResubmissionFile”。后者仅用于提供重新提交信息。审稿人有权决定是否查看技术附录。
8、 Preprints (arXiv)
The existence of non-anonymous preprints (on arXiv, social media, websites, etc.) and prior publication in non-archival venues will not result in rejection. Note that the submission to CMT must always be anonymized regardless of whether a preprint has been released. Reviewers will be instructed not to look for such preprints actively, but encountering them will not constitute a conflict of interest.
非匿名预印本(在arXiv、社交媒体、网站等发布)的存在和先前在非存档场所的出版不会导致拒稿。
请注意,提交到CMT的论文必须始终进行匿名处理,无论是否发布了预印本。审稿人将被指示不积极寻找此类预印本,但偶然遇到它们并不构成利益冲突。
9、 Conference Committee
10、 Program Committee
相关文章:

IJCAI 2024 International Joint Conference on Artificial Intelligence
目录 1、 重要1.1 官网:1.2 提交网址:1.3 模板 (latex & word) 2、 Call for Papers2.1 Important Dates2.2 Details 3、 注意事项4 New in 20245 Simplified procedure for resubmission information6、 Submission Process …...

使用Python Flask搭建Web问答应用程序并发布到公网远程访问
使用Python Flask搭建web问答应用程序框架,并发布到公网上访问 文章目录 使用Python Flask搭建web问答应用程序框架,并发布到公网上访问前言1. 安装部署Flask并制作SayHello问答界面2. 安装Cpolar内网穿透3. 配置Flask的问答界面公网访问地址4. 公网远程…...
android 13.0 app应用安装白名单
1.概述 在13.0系统rom定制化开发中,客户需求要实现应用安装白名单功能,在白名单之中的应用可以安装,其他的app不准安装,实现一个 控制app安装的功能,这需要从app安装流程入手就可以实现功能 PMS就是负责管理app安装的,功能就添加在这里就可以了,接下来看具体实现这个功能…...

SSL证书HTTPS保护服务
SSL证书属于数字证书的其中一种,广泛用于https协议,从而可以让数据传输在加密前提下完成,确保HTTPS网络安全是申请SSL证书必要工作。 SSL证书是主要用于https是一种加密协议,仔细观察网站地址会发现目前主流的网址前面都会有http…...

快速认识什么是:Docker
Docker,一种可以将软件打包到容器中并在任何环境中可靠运行的工具。但什么是容器以及为什么需要容器呢?今天就来一起学快速入门一下Docker吧!希望本文对您有所帮助。 假设您使用 Cobol 构建了一个在某种奇怪风格的 Linux 上运行的应用程序。您…...

c语言青蛙跳台阶
"青蛙跳台阶"问题是一个经典的动态规划问题,经常被用来解释动态规划的基本概念。问题的描述是:假设一只青蛙可以跳上1级或2级台阶,如果有n级台阶,那么青蛙有多少种跳法。 在C语言中,我们可以使用动态规划来…...

IntelliJ IDEA 2023.3 最新版如何试用?IntelliJ IDEA 2023.3 最新版试用方法
🌷🍁 博主猫头虎(🐅🐾)带您 Go to New World✨🍁 🦄 博客首页——🐅🐾猫头虎的博客🎐 🐳 《面试题大全专栏》 🦕 文章图文…...
Java参数校验详解:使用@Valid注解和自定义注解进行参数验证
很多时候我们需要使用不少if、else等等逻辑判断及验证,这样在进行一些重复的参数校验会很麻烦,且以后要维护也会吃力。 而这样就可以使用javax.validation。验证(Validation)常见的验证操作包括验证数据的类型、格式、长度、范围、…...

多维时序 | MATLAB实现BWO-CNN-BiGRU-Multihead-Attention多头注意力机制多变量时间序列预测
多维时序 | MATLAB实现BWO-CNN-BiGRU-Multihead-Attention多头注意力机制多变量时间序列预测 目录 多维时序 | MATLAB实现BWO-CNN-BiGRU-Multihead-Attention多头注意力机制多变量时间序列预测预测效果基本介绍模型描述程序设计参考资料 预测效果 基本介绍 MATLAB实现BWO-CNN-B…...
C++ 中的引用
文章目录 C 引用的应用1. 修改函数中传递的参数2. 避免复制大型结构3. for 循环中修改所有对象4. for 循环中避免复制对象 References vs Pointers引用的限制使用引用的优点练习Quesition 1Question 2Question 3Question 4Question 5Question 6 如果一个变量被声明为引用&#…...

MQ-Det: Multi-modal Queried Object Detection in the Wild
首个支持视觉和文本查询的开放集目标检测方法 NeurIPS2023 文章:https://arxiv.org/abs/2305.18980 代码:https://github.com/YifanXu74/MQ-Det 主框图 摘要 这篇文章提出了MQ-Det,一种高效的架构和预训练策略,它利用文本描述的…...

HarmonyOS应用开发初体验
9月25日华为秋季全场景新品发布会上,余承东宣布,全面启动鸿蒙原生应用,HarmonyOS NEXT开发者预览版将在2024年第一季度面向开发者开放。 最近鸿蒙开发可谓是火得一塌糊涂,各大培训平台都开设了鸿蒙开发课程。美团发布了鸿蒙高级工…...
《C++新经典设计模式》之第4章 策略模式
《C新经典设计模式》之第4章 策略模式 策略模式.cpp 策略模式.cpp #include <iostream> #include <memory> using namespace std;// if或switch分支不稳定,经常改动时,考虑引入算法独立到策略类中去实现// 依赖倒置原则 // 高层组件不应该依…...

【方法】PowerPoint“只读方式”如何取消?
PPT设置了以“只读方式”打开,可以保护文件无法编辑更改,那后续不需要保护了,或者想要编辑文件,要如何取消“只读方式”呢? 首先,我们要看看PPT设置的是哪种“只读方式”。 如果PPT设置的是无密码“只读方…...
MySQL数据库概念与实践
MySQL数据库概念与实践 1. 概念 MySQL是一种常用的关系型数据库管理系统,具有丰富的功能和广泛的应用。在本篇博客中,我们将介绍MySQL数据库的一些重要概念和相关知识。 存储引擎 存储引擎是MySQL数据库用于存储、更新和查询数据的技术实现方法。MyS…...

【ArcGIS Pro微课1000例】0052:基于SQL Server创建企业级地理数据库案例
文章目录 环境搭建创建企业级数据库连接企业级数据库环境搭建 ArcGIS:ArcGIS Pro 3.0.1Server.ecp:版本为10.7SQL Server:版本为SQL Server Developer 2019创建企业级数据库 企业级地理数据库的创建需要通过工具箱来实现。工具位于:数据管理工具→地理数据库管理→创建企业…...

深度学习——第3章 Python程序设计语言(3.7 matplotlib库)
3.7 matplotlib库 目录 1 matplotlib库简介 2 pyplot的plot函数 3 matplotlib基础绘图函数示例 数据可视化有助于深度理解数据。 本节介绍绘制图形的基本方法。 1. matplotlib库简介 matplotlib官网 1.1 matplotlib库概述 matplotlib是Python优秀的数据可视化第三方库&a…...

【数据分析实战】酒店行业华住集团门店分布与评分多维度分析
文章目录 1. 写在前面2. 数据集展示3. 多维度分析3.1 门店档次多元化:集团投资战略观察3.1.1 代码实现3.1.2 本人浅薄理解 3.2 门店分布:各省市分布概览3.2.1 代码实现3.2.2 本人浅薄理解 3.3 门店分级评分:服务水平的多维度观察3.3.1 代码实…...

近期Chrome浏览器 不知哪个版本升级后原先http强制跳转到https,导致服务端302强制跳转到http也没反应
关于Chrome更新http强制跳转到https解决方法 近期Chrome浏览器 不知哪个版本升级后原先http强制跳转到https,导致服务端302强制跳转到http也没反应一、F12检查加载的Response Headers中有没有Non-Authoritative-Reason二、找了资料后得到解决方案:三、找…...

【scikit-learn基础】--『数据加载』之样本生成器
除了内置的数据集,scikit-learn还提供了随机样本的生成器。通过这些生成器函数,可以生成具有特定特性和分布的随机数据集,以帮助进行机器学习算法的研究、测试和比较。 目前,scikit-learn库(v1.3.0版)中有2…...
谷歌浏览器插件
项目中有时候会用到插件 sync-cookie-extension1.0.0:开发环境同步测试 cookie 至 localhost,便于本地请求服务携带 cookie 参考地址:https://juejin.cn/post/7139354571712757767 里面有源码下载下来,加在到扩展即可使用FeHelp…...

Linux 文件类型,目录与路径,文件与目录管理
文件类型 后面的字符表示文件类型标志 普通文件:-(纯文本文件,二进制文件,数据格式文件) 如文本文件、图片、程序文件等。 目录文件:d(directory) 用来存放其他文件或子目录。 设备…...

springboot 百货中心供应链管理系统小程序
一、前言 随着我国经济迅速发展,人们对手机的需求越来越大,各种手机软件也都在被广泛应用,但是对于手机进行数据信息管理,对于手机的各种软件也是备受用户的喜爱,百货中心供应链管理系统被用户普遍使用,为方…...

Spark 之 入门讲解详细版(1)
1、简介 1.1 Spark简介 Spark是加州大学伯克利分校AMP实验室(Algorithms, Machines, and People Lab)开发通用内存并行计算框架。Spark在2013年6月进入Apache成为孵化项目,8个月后成为Apache顶级项目,速度之快足见过人之处&…...

对WWDC 2025 Keynote 内容的预测
借助我们以往对苹果公司发展路径的深入研究经验,以及大语言模型的分析能力,我们系统梳理了多年来苹果 WWDC 主题演讲的规律。在 WWDC 2025 即将揭幕之际,我们让 ChatGPT 对今年的 Keynote 内容进行了一个初步预测,聊作存档。等到明…...
在Ubuntu中设置开机自动运行(sudo)指令的指南
在Ubuntu系统中,有时需要在系统启动时自动执行某些命令,特别是需要 sudo权限的指令。为了实现这一功能,可以使用多种方法,包括编写Systemd服务、配置 rc.local文件或使用 cron任务计划。本文将详细介绍这些方法,并提供…...

从零开始打造 OpenSTLinux 6.6 Yocto 系统(基于STM32CubeMX)(九)
设备树移植 和uboot设备树修改的内容同步到kernel将设备树stm32mp157d-stm32mp157daa1-mx.dts复制到内核源码目录下 源码修改及编译 修改arch/arm/boot/dts/st/Makefile,新增设备树编译 stm32mp157f-ev1-m4-examples.dtb \stm32mp157d-stm32mp157daa1-mx.dtb修改…...

ServerTrust 并非唯一
NSURLAuthenticationMethodServerTrust 只是 authenticationMethod 的冰山一角 要理解 NSURLAuthenticationMethodServerTrust, 首先要明白它只是 authenticationMethod 的选项之一, 并非唯一 1 先厘清概念 点说明authenticationMethodURLAuthenticationChallenge.protectionS…...
汇编常见指令
汇编常见指令 一、数据传送指令 指令功能示例说明MOV数据传送MOV EAX, 10将立即数 10 送入 EAXMOV [EBX], EAX将 EAX 值存入 EBX 指向的内存LEA加载有效地址LEA EAX, [EBX4]将 EBX4 的地址存入 EAX(不访问内存)XCHG交换数据XCHG EAX, EBX交换 EAX 和 EB…...

IoT/HCIP实验-3/LiteOS操作系统内核实验(任务、内存、信号量、CMSIS..)
文章目录 概述HelloWorld 工程C/C配置编译器主配置Makefile脚本烧录器主配置运行结果程序调用栈 任务管理实验实验结果osal 系统适配层osal_task_create 其他实验实验源码内存管理实验互斥锁实验信号量实验 CMISIS接口实验还是得JlINKCMSIS 简介LiteOS->CMSIS任务间消息交互…...