k8s集群环境搭建以及插件安装

前置条件

终端工具MobaXterm很好用。
1、虚拟机三台（ip按自己的网络环境相应配置）(master/node)

节点	ip
k8s-master	192.168.200.150
k8s-node1	192.168.200.151
k8s-node2	192.168.200.152

2、关闭防火墙(master/node)

systemctl stop firewalld 
systemctl disable firewalld

查看防火墙状态：systemctl status firewalld
3、关闭selinux(master/node)

setenforce 0  # 临时关闭
sed -i 's/SELINUX=enforcing/SELINUX=disabled/g' /etc/selinux/config  # 永久关闭 

4、关闭swap(master/node)

swapoff -a    # 临时关闭；关闭swap主要是为了性能考虑

free             # 可以通过这个命令查看swap是否关闭了

sed -ri 's/.*swap.*/#&/' /etc/fstab  # 永久关闭

5、添加主机名与IP对应的关系(master/node)
$ vim /etc/hosts
#添加如下内容：
192.168.200.150 k8s-master
192.168.200.151 k8s-node1
192.168.200.152 k8s-node2
#保存退出
6、修改主机名(master/node)
#k8s-master
[root@localhost ~] hostname
localhost.localdomain
[root@localhost ~] hostname k8s-master ##临时生效
[root@localhost ~] hostnamectl set-hostname k8s-master ##重启后永久生效
#k8s-node1
[root@localhost ~] hostname
localhost.localdomain
[root@localhost ~] hostname k8s-node1 ##临时生效
[root@localhost ~] hostnamectl set-hostname k8s-node1 ##重启后永久生效
7、桥接设置(master/node)

cat > /etc/sysctl.d/k8s.conf << EOF
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
EOFsysctl --system

以上几步最好照着都执行一下，以免后面报一大堆错

安装docker(master/node)

注意docker与k8s 的版本对照关系。本次按照的k8s版本为1.18.0，对应的docker版本为docker-ce-19.03.9-3.el7
如果已经安装了dokcer就不需要重复安装了
1.安装wget
$ yum -y install wget
2.添加docker yum源
$ wget https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo -O/etc/yum.repos.d/docker-ce.repo
3.安装docker
$ yum -y install docker-ce-19.03.9-3.el7 docker-ce-cli-19.03.9-3.el7
4.设置开机启动
$ systemctl enable docker
5.启动docker
$ systemctl start docker

6.编辑docker配置文件

mkdir /etc/docker/ 
cat > /etc/docker/daemon.json << EOF
{
"registry-mirrors": ["https://gqs7xcfd.mirror.aliyuncs.com","https://hub-mirror.c.163.com"],
"exec-opts": ["native.cgroupdriver=systemd"],
"log-driver": "json-file",
"log-opts": {
"max-size": "100m"
},
"storage-driver": "overlay2"
}
EOF

7.重启docker
$ systemctl restart docker

安装kubernetes

1.为kubernetes添加阿里云YUM软件源(master/node)

cat > /etc/yum.repos.d/kubernetes.repo << EOF
[k8s]
name=k8s
enabled=1
gpgcheck=0 
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/
EOF

2.安装kubeadm，kubelet和kubectl(master/node)
版本可以选择自己要安装的版本号，我安装的是1.18.0
$ yum install -y kubelet-1.18.0 kubectl-1.18.0 kubeadm-1.18.0
3.设置开机自启动

$ systemctl enable kubelet

master节点初始化

部署Kubernetes (master) ,node节点不需要执行kubeadm init

kubeadm init \--apiserver-advertise-address=192.168.200.150 \--image-repository registry.aliyuncs.com/google_containers \--kubernetes-version v1.18.0 \--service-cidr=10.1.0.0/16 \--pod-network-cidr=10.244.0.0/16

因为初始化的时候会做一下检查，如果出现一下错误。

[preflight] Running pre-flight checks error execution phase preflight:
[preflight] Some fatal errors occurred:
[ERROR Swap]: running with swap on is not supported. Please disable swap [preflight] If you know what you are doing, you can make
a check non-fatal with --ignore-preflight-errors=... To see the
stack trace of this error execute with --v=5 or higher

重启一下就好了，刚才修改的swap没有生效。
初始化完成可以看到下面的画面，如果有错误的话需要排查一下。

配置kubectl

mkdir -p $HOME/.kube
cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
chown $(id -u):$(id -g) $HOME/.kube/config

查看节点
kubectl get nodes
NAME STATUS ROLES AGE VERSION
k8s-master NotReady master 6m42s v1.18.0

在两台Node节点上执行join命令

在两台node节点上分别执行join命令

kubeadm join 192.168.200.150:6443 --token 6mjjzr.imfudxt8568utrvv \--discovery-token-ca-cert-hash sha256:c89fd5ec80eac07429aeb450d475eec53d7d88e51c489c817fd5b7d8f3ebe3ce

查看节点
kubectl get nodes
NAME STATUS ROLES AGE VERSION
k8s-master NotReady master 9m54s v1.18.0
k8s-node1 NotReady 42s v1.18.0
k8s-node2 NotReady 46s v1.18.0

安装插件

1.安装 flannel
从官网下载yaml文件

wget https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml

然后执行yaml文件

kubectl apply -f kube-flannel.yml

查看所有pod
kubectl  get pods -A
查看命名空间pod
kubectl -n <namespace> get pods -o wide

2.部署busybox来测试集群各网络情况
vi busybox.yaml

---
apiVersion: apps/v1
kind: Deployment
metadata:name: busybox
spec:replicas: 2selector:matchLabels:name: busyboxtemplate:metadata:labels:name: busyboxspec:containers:- name: busyboximage: busybox  imagePullPolicy: IfNotPresentargs:- /bin/sh- -c- sleep 1; touch /tmp/healthy; sleep 30000readinessProbe:   exec:command:- cat- /tmp/healthyinitialDelaySeconds: 1

kubectl apply -f busybox.yaml
查看所有pod

[root@k8s-master ~]# kubectl  get pods -A -o wide
NAMESPACE      NAME                                 READY   STATUS    RESTARTS   AGE     IP                NODE         NOMINATED NODE   READINESS GATES
default        busybox-7c84546778-69hq7             1/1     Running   0          90s     10.244.2.2        k8s-node1    <none>           <none>
default        busybox-7c84546778-plzwg             1/1     Running   0          90s     10.244.1.2        k8s-node2    <none>           <none>

进入pod，查看pod 和各node是否互通

kubectl exec -it busybox-7c84546778-69hq7 -- /bin/sh
/ # ping -c 10.244.1.2
ping: invalid number '10.244.1.2'
/ # ping -c -2 10.244.1.2
ping: invalid number '-2'
/ # ping -c 2 10.244.1.2
PING 10.244.1.2 (10.244.1.2): 56 data bytes
64 bytes from 10.244.1.2: seq=0 ttl=62 time=0.504 ms
64 bytes from 10.244.1.2: seq=1 ttl=62 time=1.611 ms--- 10.244.1.2 ping statistics ---
2 packets transmitted, 2 packets received, 0% packet loss
round-trip min/avg/max = 0.504/1.057/1.611 ms
/ # ping -c 2 192.168.200.151
PING 192.168.200.151 (192.168.200.151): 56 data bytes
64 bytes from 192.168.200.151: seq=0 ttl=64 time=0.070 ms
64 bytes from 192.168.200.151: seq=1 ttl=64 time=0.074 ms--- 192.168.200.151 ping statistics ---
2 packets transmitted, 2 packets received, 0% packet loss
round-trip min/avg/max = 0.070/0.072/0.074 ms
/ # ping -c 2 192.168.200.152
PING 192.168.200.152 (192.168.200.152): 56 data bytes
64 bytes from 192.168.200.152: seq=0 ttl=63 time=0.273 ms
64 bytes from 192.168.200.152: seq=1 ttl=63 time=0.203 ms--- 192.168.200.152 ping statistics ---
2 packets transmitted, 2 packets received, 0% packet loss
round-trip min/avg/max = 0.203/0.238/0.273 ms

部署dashboard

下载dashboard

wget https://raw.githubusercontent.com/kubernetes/dashboard/v2.0.3/aio/deploy/recommended.yaml

#修改dashboard配置，特别要注意空格，要按照前面的对齐！
#vim recommended.yaml

#增加nodeport配置
kind: Service
apiVersion: v1
metadata:labels:k8s-app: kubernetes-dashboardname: kubernetes-dashboardnamespace: kubernetes-dashboard
spec:type: NodePort #增加此行ports:- port: 443targetPort: 8443nodePort: 30000 #增加此行selector:k8s-app: kubernetes-dashboard

kubectl apply -f recommended.yaml

[root@k8s-master ~]# kubectl get pod -n kubernetes-dashboard
NAME                                         READY   STATUS    RESTARTS   AGE
dashboard-metrics-scraper-6b4884c9d5-vmfzc   1/1     Running   0          2m9s
kubernetes-dashboard-7f99b75bf4-2d7sg        1/1     Running   0          2m9s

访问地址：https://192.168.200.150:30000/#/login

创建用户
如上图，跳转到了登录页面，那我们就先创建个用户：

1.创建服务账号
首先创建一个叫admin-user的服务账号，并放在kube-system名称空间下：

admin-user.yaml

apiVersion: v1
kind: ServiceAccount
metadata:name: admin-usernamespace: kube-system

执行kubectl create命令：

kubectl create -f admin-user.yaml

2.绑定角色
默认情况下，kubeadm创建集群时已经创建了admin角色，我们直接绑定即可：

admin-user-role-binding.yaml

apiVersion: rbac.authorization.k8s.io/v1beta1
kind: ClusterRoleBinding
metadata:name: admin-user
roleRef:apiGroup: rbac.authorization.k8s.iokind: ClusterRolename: cluster-admin
subjects:
- kind: ServiceAccountname: admin-usernamespace: kube-system

执行kubectl create命令：

kubectl create -f  admin-user-role-binding.yaml

3.获取Token
现在我们需要找到新创建的用户的Token，以便用来登录dashboard：

kubectl -n kube-system describe secret $(kubectl -n kube-system get secret | grep admin-user | awk '{print $1}')

输出类似：

Name:         admin-user-token-qrj82
Namespace:    kube-system
Labels:       <none>
Annotations:  kubernetes.io/service-account.name=admin-userkubernetes.io/service-account.uid=6cd60673-4d13-11e8-a548-00155d000529Type:  kubernetes.io/service-account-tokenData
====
token:      eyJhbGciOiJSUzI1NiIsImtpZCI6IiJ9.eyJpc3MiOiJrdWJlcm5ldGVzL3NlcnZpY2VhY2NvdW50Iiwia3ViZXJuZXRlcy5pby9zZXJ2aWNlYWNjb3VudC9uYW1lc3BhY2UiOiJrdWJlLXN5c3RlbSIsImt1YmVybmV0ZXMuaW8vc2VydmljZWFjY291bnQvc2VjcmV0Lm5hbWUiOiJhZG1pbi11c2VyLXRva2VuLXFyajgyIiwia3ViZXJuZXRlcy5pby9zZXJ2aWNlYWNjb3VudC9zZXJ2aWNlLWFjY291bnQubmFtZSI6ImFkbWluLXVzZXIiLCJrdWJlcm5ldGVzLmlvL3NlcnZpY2VhY2NvdW50L3NlcnZpY2UtYWNjb3VudC51aWQiOiI2Y2Q2MDY3My00ZDEzLTExZTgtYTU0OC0wMDE1NWQwMDA1MjkiLCJzdWIiOiJzeXN0ZW06c2VydmljZWFjY291bnQ6a3ViZS1zeXN0ZW06YWRtaW4tdXNlciJ9.C5mjsa2uqJwjscWQ9x4mEsWALUTJu3OSfLYecqpS1niYXxp328mgx0t-QY8A7GQvAr5fWoIhhC_NOHkSkn2ubn0U22VGh2msU6zAbz9sZZ7BMXG4DLMq3AaXTXY8LzS3PQyEOCaLieyEDe-tuTZz4pbqoZQJ6V6zaKJtE9u6-zMBC2_iFujBwhBViaAP9KBbE5WfREEc0SQR9siN8W8gLSc8ZL4snndv527Pe9SxojpDGw6qP_8R-i51bP2nZGlpPadEPXj-lQqz4g5pgGziQqnsInSMpctJmHbfAh7s9lIMoBFW7GVE8AQNSoLHuuevbLArJ7sHriQtDB76_j4fmA
ca.crt:     1025 bytes
namespace:  11 bytes

然后把Token复制到登录界面的Token输入框中，登入后显示如下：

部署metrics-server

下载metrics-server（会抽风下载不下来）

wget https://github.com/kubernetes-sigs/metrics-server/releases/latest/download/components.yaml

修改镜像地址
将部署文件中镜像地址修改为国内的地址，大概在部署文件的第140行。 原配置是：

image: k8s.gcr.io/metrics-server/metrics-server:v0.6.2
修改后的配置是：

image: registry.cn-hangzhou.aliyuncs.com/google_containers/metrics-server:v0.6.2

部署metrics server
kubectl create -f components.yaml

查看metric server的运行情况，发现探针问题：Readiness probe failed: HTTP probe failed with statuscode: 500

[root@centos05 deployment]# kubectl get pods -n kube-system | grep metrics
kube-system metrics-server-7f6b85b597-j2p5h 0/1 Running 0 2m23s
[root@centos05 deployment]# kubectl describe pod metrics-server-7f6b85b597-j2p5h -n kube-system

在大概 139 行的位置追加参数：–kubelet-insecure-tls，修改后内容如下：

spec:containers:- args:- --cert-dir=/tmp- --secure-port=4443- --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname- --kubelet-use-node-status-port- --metric-resolution=15s- --kubelet-insecure-tls

再次部署文件：

kubectl apply -f components.yaml

执行kubectl top命令成功：

[root@k8s-master kubernetes]# kubectl top pod
NAME                                CPU(cores)   MEMORY(bytes)
busybox-7c84546778-69hq7            1m           0Mi
busybox-7c84546778-plzwg            1m           0Mi
nginx-deployment                    0m           1Mi
nginx-deployment-788b8d7b98-528cj   0m           1Mi
nginx-deployment-788b8d7b98-8j6q4   0m           1Mi

再进入dashboard发现有监控了，token过期的话再执行上面获取token一次。

完结，后续继续学习k8s吧