当前位置: 首页 > news >正文

idea中的Maven导包失败问题解决总结

idea中的Maven导包失败问题解决总结

  1. 先确定idea和Maven 的配置文件settings 没有问题
    找到我们本地的maven仓库,默认的maven仓库路径是在\C:\Users\用户名.m2下
    有两个文件夹,repositotry是放具体jar包的,根据报错包的名,找对应文件夹就能找到对应jar包的位置
    在这里插入图片描述
    wrapper 是放maven 安装文件的,在所有安装文件中找到conf 文件下的settings.xml 文件,确保文件正确,比如有阿里云镜像源
    在这里插入图片描述
    在这里插入图片描述
    将settings文件加入阿里云镜像源,对应的jdk版本 等
    正确的setings.xml,可直接复制内容替换掉原来的文件
<?xml version="1.0" encoding="UTF-8"?><!--
Licensed to the Apache Software Foundation (ASF) under one
or more contributor license agreements.  See the NOTICE file
distributed with this work for additional information
regarding copyright ownership.  The ASF licenses this file
to you under the Apache License, Version 2.0 (the
"License"); you may not use this file except in compliance
with the License.  You may obtain a copy of the License athttp://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing,
software distributed under the License is distributed on an
"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
KIND, either express or implied.  See the License for the
specific language governing permissions and limitations
under the License.
--><!--| This is the configuration file for Maven. It can be specified at two levels:||  1. User Level. This settings.xml file provides configuration for a single user,|                 and is normally provided in ${user.home}/.m2/settings.xml.||                 NOTE: This location can be overridden with the CLI option:||                 -s /path/to/user/settings.xml||  2. Global Level. This settings.xml file provides configuration for all Maven|                 users on a machine (assuming they're all using the same Maven|                 installation). It's normally provided in|                 ${maven.conf}/settings.xml.||                 NOTE: This location can be overridden with the CLI option:||                 -gs /path/to/global/settings.xml|| The sections in this sample file are intended to give you a running start at| getting the most out of your Maven installation. Where appropriate, the default| values (values used when the setting is not specified) are provided.||-->
<settings xmlns="http://maven.apache.org/SETTINGS/1.0.0"xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"xsi:schemaLocation="http://maven.apache.org/SETTINGS/1.0.0 http://maven.apache.org/xsd/settings-1.0.0.xsd"><!-- localRepository| The path to the local repository maven will use to store artifacts.|| Default: ${user.home}/.m2/repository<localRepository>/path/to/local/repo</localRepository>--><localRepository>D:\repository</localRepository><!-- interactiveMode| This will determine whether maven prompts you when it needs input. If set to false,| maven will use a sensible default value, perhaps based on some other setting, for| the parameter in question.|| Default: true<interactiveMode>true</interactiveMode>--><!-- offline| Determines whether maven should attempt to connect to the network when executing a build.| This will have an effect on artifact downloads, artifact deployment, and others.|| Default: false<offline>false</offline>--><!-- pluginGroups| This is a list of additional group identifiers that will be searched when resolving plugins by their prefix, i.e.| when invoking a command line like "mvn prefix:goal". Maven will automatically add the group identifiers| "org.apache.maven.plugins" and "org.codehaus.mojo" if these are not already contained in the list.|--><pluginGroups><!-- pluginGroup| Specifies a further group identifier to use for plugin lookup.<pluginGroup>com.your.plugins</pluginGroup>--></pluginGroups><!-- proxies| This is a list of proxies which can be used on this machine to connect to the network.| Unless otherwise specified (by system property or command-line switch), the first proxy| specification in this list marked as active will be used.|--><proxies><!-- proxy| Specification for one proxy, to be used in connecting to the network.|<proxy><id>optional</id><active>true</active><protocol>http</protocol><username>proxyuser</username><password>proxypass</password><host>proxy.host.net</host><port>80</port><nonProxyHosts>local.net|some.host.com</nonProxyHosts></proxy>--></proxies><!-- servers| This is a list of authentication profiles, keyed by the server-id used within the system.| Authentication profiles can be used whenever maven must make a connection to a remote server.|--><servers><!-- server| Specifies the authentication information to use when connecting to a particular server, identified by| a unique name within the system (referred to by the 'id' attribute below).|| NOTE: You should either specify username/password OR privateKey/passphrase, since these pairings are|       used together.|<server><id>deploymentRepo</id><username>repouser</username><password>repopwd</password></server>--><!-- Another sample, using keys to authenticate.<server><id>siteServer</id><privateKey>/path/to/private/key</privateKey><passphrase>optional; leave empty if not used.</passphrase></server>--></servers><!-- mirrors| This is a list of mirrors to be used in downloading artifacts from remote repositories.|| It works like this: a POM may declare a repository to use in resolving certain artifacts.| However, this repository may have problems with heavy traffic at times, so people have mirrored| it to several places.|| That repository definition will have a unique id, so we can create a mirror reference for that| repository, to be used as an alternate download site. The mirror site will be the preferred| server for that repository.|--><mirrors><!-- mirror| Specifies a repository mirror site to use instead of a given repository. The repository that| this mirror serves has an ID that matches the mirrorOf element of this mirror. IDs are used| for inheritance and direct lookup purposes, and must be unique across the set of mirrors.|<mirror><id>mirrorId</id><mirrorOf>repositoryId</mirrorOf><name>Human Readable Name for this Mirror.</name><url>http://my.repository.com/repo/path</url></mirror>--><!-- 阿里云仓库 --><mirror><id>alimaven</id><mirrorOf>central</mirrorOf><name>aliyun maven</name><url>http://maven.aliyun.com/nexus/content/repositories/central/</url></mirror><!-- 中央仓库1 --><mirror><id>repo1</id><mirrorOf>central</mirrorOf><name>Human Readable Name for this Mirror.</name><url>http://repo1.maven.org/maven2/</url></mirror><!-- 中央仓库2 --><mirror><id>repo2</id><mirrorOf>central</mirrorOf><name>Human Readable Name for this Mirror.</name><url>http://repo2.maven.org/maven2/</url></mirror></mirrors><!-- profiles| This is a list of profiles which can be activated in a variety of ways, and which can modify| the build process. Profiles provided in the settings.xml are intended to provide local machine-| specific paths and repository locations which allow the build to work in the local environment.|| For example, if you have an integration testing plugin - like cactus - that needs to know where| your Tomcat instance is installed, you can provide a variable here such that the variable is| dereferenced during the build process to configure the cactus plugin.|| As noted above, profiles can be activated in a variety of ways. One way - the activeProfiles| section of this document (settings.xml) - will be discussed later. Another way essentially| relies on the detection of a system property, either matching a particular value for the property,| or merely testing its existence. Profiles can also be activated by JDK version prefix, where a| value of '1.4' might activate a profile when the build is executed on a JDK version of '1.4.2_07'.| Finally, the list of active profiles can be specified directly from the command line.|| NOTE: For profiles defined in the settings.xml, you are restricted to specifying only artifact|       repositories, plugin repositories, and free-form properties to be used as configuration|       variables for plugins in the POM.||--><profiles><!-- profile| Specifies a set of introductions to the build process, to be activated using one or more of the| mechanisms described above. For inheritance purposes, and to activate profiles via <activatedProfiles/>| or the command line, profiles have to have an ID that is unique.|| An encouraged best practice for profile identification is to use a consistent naming convention| for profiles, such as 'env-dev', 'env-test', 'env-production', 'user-jdcasey', 'user-brett', etc.| This will make it more intuitive to understand what the set of introduced profiles is attempting| to accomplish, particularly when you only have a list of profile id's for debug.|| This profile example uses the JDK version to trigger activation, and provides a JDK-specific repo.<profile><id>jdk-1.4</id><activation><jdk>1.4</jdk></activation><repositories><repository><id>jdk14</id><name>Repository for JDK 1.4 builds</name><url>http://www.myhost.com/maven/jdk14</url><layout>default</layout><snapshotPolicy>always</snapshotPolicy></repository></repositories></profile>--><!--| Here is another profile, activated by the system property 'target-env' with a value of 'dev',| which provides a specific path to the Tomcat instance. To use this, your plugin configuration| might hypothetically look like:|| ...| <plugin>|   <groupId>org.myco.myplugins</groupId>|   <artifactId>myplugin</artifactId>||   <configuration>|     <tomcatLocation>${tomcatPath}</tomcatLocation>|   </configuration>| </plugin>| ...|| NOTE: If you just wanted to inject this configuration whenever someone set 'target-env' to|       anything, you could just leave off the <value/> inside the activation-property.|<profile><id>env-dev</id><activation><property><name>target-env</name><value>dev</value></property></activation><properties><tomcatPath>/path/to/tomcat/instance</tomcatPath></properties></profile>--><profile>     <id>JDK-1.8</id>       <activation>       <activeByDefault>true</activeByDefault>       <jdk>1.8</jdk>       </activation>       <properties>       <maven.compiler.source>1.8</maven.compiler.source>       <maven.compiler.target>1.8</maven.compiler.target>       <maven.compiler.compilerVersion>1.8</maven.compiler.compilerVersion>       </properties>       </profile></profiles><!-- activeProfiles| List of profiles that are active for all builds.|<activeProfiles><activeProfile>alwaysActiveProfile</activeProfile><activeProfile>anotherAlwaysActiveProfile</activeProfile></activeProfiles>-->
</settings>

同样还有idea 安装目录下的maven文件加下的配置文件settings.xml
在这里插入图片描述
在这里插入图片描述
2. 解决settings.xml配置文件问题,就找到报错对应的jar包文件夹,将其中的删除 _remote.repositories 文件和以Lastupdated结尾的文件,
以Lastupdated结尾的文件必须删除, _remote.repositories 文件选择性删除,可把 _remote.repositories 文件中的 nexus= 改成 central=,还是有问题就删除掉 _remote.repositories 文件。
可以直接在repositotry文件夹中搜索以Lastupdated结尾的文件,然后全部删除
在这里插入图片描述
3. 在 Settings - Maven - Runner - VM Options 中添加 -DarchetypeCatalog=internal,优先从本地仓库读取,添加-Dmaven.wagon.http.ssl.insecure=true -Dmaven.wagon.http.ssl.allowall=true,忽略证书检查
在这里插入图片描述
命令

-DarchetypeCatalog=internal -Dmaven.wagon.http.ssl.insecure=true -Dmaven.wagon.http.ssl.allowall=true
  1. idea点击重新导包
    在这里插入图片描述

相关文章:

idea中的Maven导包失败问题解决总结

idea中的Maven导包失败问题解决总结 先确定idea和Maven 的配置文件settings 没有问题 找到我们本地的maven仓库&#xff0c;默认的maven仓库路径是在\C:\Users\用户名.m2下 有两个文件夹&#xff0c;repositotry是放具体jar包的&#xff0c;根据报错包的名&#xff0c;找对应文…...

REDIS中的缓存穿透,缓存击穿,缓存雪崩原因以及解决方案

需求引入一般在项目的开发中,都是使用关系型数据库来进行数据的存储&#xff0c;通常不会存在什么高并发的情况&#xff0c;可是一旦涉及大数据量的需求&#xff0c;比如商品抢购&#xff0c;网页活动导致的主页访问量瞬间增大&#xff0c;单一使用关系型数据库来保存数据的系统…...

数据库及缓存之MySQL(一)

思维导图 常见知识点 1.mysql存储引擎&#xff1a; 2.innodb与myisam区别&#xff1a; 3.表设计字段选择&#xff1a; 4.mysql的varchar(M)最多存储数据&#xff1a; 5.事务基本特性&#xff1a; 6.事务并发引发问题&#xff1a; 7.mysql索引&#xff1a; 8.三星索引&#xf…...

项目管理中,项目经理需要具备哪些能力?

项目经理是团队的领导者&#xff0c;是带领项目团队对项目进行策划、执行&#xff0c;完成项目目标&#xff0c;对于项目经理来说&#xff0c;想要有序推进项目&#xff0c;使项目更成功&#xff0c;光有理论知识是不够的&#xff0c;也要具备这些能力&#xff1a; 1、分清主…...

itk中的一些图像处理

文章目录1.BinomialBlurImageFilter计算每个维度上的最近邻居平均值2.高斯平滑3.图像的高阶导数 RecursiveGaussianImageFilter4.均值滤波5.中值滤波6.离散高斯平滑7.曲率驱动流去噪图像 CurvatureFlowImageFilter8.由参数alpha和beta控制的幂律自适应直方图均衡化9.Canny 边缘…...

Endless lseek导致的SQL异常

最近碰到同事咨询的一个问题&#xff0c;在执行一个函数时&#xff0c;发现会一直卡在那里。 strace抓了下发现会话一直在执行lseek&#xff0c;大致情况如下&#xff1a; 16:13:55.451832 lseek(33, 0, SEEK_END) 1368064 <0.000037> 16:13:55.477216 lseek(33, 0, SE…...

JUC-day01

JUC-day01 什么是JUC线程的状态: wait sleep关键字:同步锁 原理(重点)Lock接口: ReentrantLock(可重入锁)—>AQS CAS线程之间的通讯 1 什么是JUC 1.1 JUC简介 在Java中&#xff0c;线程部分是一个重点&#xff0c;本篇文章说的JUC也是关于线程的。JUC就是java.util .con…...

Mind+Python+Mediapipe项目——AI健身之跳绳

原文&#xff1a;MindPythonMediapipe项目——AI健身之跳绳 - DF创客社区 - 分享创造的喜悦 【项目背景】跳绳是一个很好的健身项目&#xff0c;为了获知所跳个数&#xff0c;有的跳绳上会有计数器。但这也只能跳完这后看到&#xff0c;能不能在跳的过程中就能看到&#xff0c;…...

数据库概述

20世纪60年代后期&#xff0c;就出现了数据库技术。取得成就如下&#xff1a;造就了四位图灵奖得主发展成为以数据建模和DBMS核心技术为主&#xff0c;内容丰富的一门学科。带动了一个巨大的软件产业-DBMS产品及其相关工具和解决方案。四个基本概念数据数据是数据库中存储的基本…...

【已解决】解决IDEA的maven刷新依赖时出现Connot reconnect错误

前言 小编我将用CSDN记录软件开发求学之路上亲身所得与所学的心得与知识&#xff0c;有兴趣的小伙伴可以关注一下&#xff01;也许一个人独行&#xff0c;可以走的很快&#xff0c;但是一群人结伴而行&#xff0c;才能走的更远&#xff01;让我们在成长的道路上互相学习&#…...

动态链接库(.so)文件的变编译和引用、执行

动态链接库(.so)文件的变编译和引用 动态链接库&#xff1a;SO&#xff08;Shared Object&#xff09;是一种动态链接库&#xff0c;也被称为共享库。它是一种可被多个程序共享使用的二进制代码库&#xff0c;其中包含已编译的函数和代码。与静态链接库不同&#xff0c;动态链接…...

linux(centos8)文件解压命令

linux解压命令tar 解压命令常用解压命令1 [.tar] 文件 解压到当前文件夹2 [.tar.gz] 文件 解压到当前文件夹3 [.tar] 解压到指定文件夹 -C 必须是大写unzip 解压命令常用解压命令1 [.zip]解压到当前文件夹2 [.zip] 解压到指定文件夹2 [.zip] 解压到指定文件夹&#xff08;强行覆…...

阅读笔记6——通道混洗

一、逐点卷积 当前先进的轻量化网络大都使用深度可分离卷积或组卷积&#xff0c;以降低网络的计算量&#xff0c;但这两种操作都无法改变特征图的通道数&#xff0c;因此需要使用11的卷积。总体来说&#xff0c;逐点的11卷积有如下两点特性&#xff1a; 可以促进通道之间的信息…...

上海亚商投顾:沪指失守3300点 卫星导航概念全天强势

上海亚商投顾前言&#xff1a;无惧大盘涨跌&#xff0c;解密龙虎榜资金&#xff0c;跟踪一线游资和机构资金动向&#xff0c;识别短期热点和强势个股。市场情绪指数早间低开后震荡回升&#xff0c;沪指盘中一度翻红&#xff0c;随后又再度走低&#xff0c;创业板指午后跌近1%。…...

疯狂的SOVA:Android银行木马“新标杆”

2021年8月初&#xff0c;一款针对Android银行APP的恶意软件出现在人们的视野中&#xff0c;ThreatFabric 安全研究人员首次发现了这一木马&#xff0c;在其C2服务器的登录面板&#xff0c;研究人员发现&#xff0c;攻击者将其称之为SOVA。 ** SO** ** V** ** A简介** 在俄语中…...

汽车零部件企业数字工厂管理系统建设方案

在汽车零部件制造领域&#xff0c;伴随工业信息化与机器人化&#xff0c;制造模式逐渐从 CAD/CAE/CAM 数字化设计及加工走向全产品周期虚拟现实的数字化工厂管理系统平台&#xff0c;实现虚拟现实设计制造&#xff0c;防范产品缺陷并预防设备故障&#xff0c;大幅提高生产效率。…...

【线程同步工具】Semaphore源码解析

控制对资源的一个或多个副本的并发访问 Java API 提供了一种信号量机制 Semaphore。 一个信号量就是一个计数器&#xff0c; 可用于保护对一个或多个共享资源的访问。 当一个线程要访问多个共享资源中的一个时&#xff0c;它首先需要获得一个信号量。如果信号量内部的计数器的…...

获取实时天气

一、用天气API&#xff08;需要付费&#xff09; 网址&#xff1a;https://www.tianqiapi.com/请求方式及url&#xff1a;请求方式&#xff1a;GET接口地址&#xff1a;https://tianqiapi.com/free/day请求示例https://www.tianqiapi.com/free/day?appid_____&appsecret__…...

【数据库】redis数据持久化

目录 数据持久化 一&#xff0c; RDB 1&#xff0c; 什么是RDB 2&#xff0c;持久化流程 3&#xff0c; 相关配置 案例演示&#xff1a; 4&#xff0c; 备份和恢复 1、备份 2、恢复 3&#xff0c;优势 4&#xff0c; 劣势 二&#xff0c;AOF 1&#xff0c;什么是A…...

前端编译、JIT编译、AOT编译

一、前端编译&#xff1a;java设计之初就是强调跨平台&#xff0c;通过javac将源文件编译成于平台无关的class文件&#xff0c; 它定义了执行 Java 程序所需的所有信息&#xff08;许多Java"语法糖"&#xff0c;是在这个阶段完成的&#xff0c;不依赖虚拟机&#xff…...

基于距离变化能量开销动态调整的WSN低功耗拓扑控制开销算法matlab仿真

目录 1.程序功能描述 2.测试软件版本以及运行结果展示 3.核心程序 4.算法仿真参数 5.算法理论概述 6.参考文献 7.完整程序 1.程序功能描述 通过动态调整节点通信的能量开销&#xff0c;平衡网络负载&#xff0c;延长WSN生命周期。具体通过建立基于距离的能量消耗模型&am…...

Xshell远程连接Kali(默认 | 私钥)Note版

前言:xshell远程连接&#xff0c;私钥连接和常规默认连接 任务一 开启ssh服务 service ssh status //查看ssh服务状态 service ssh start //开启ssh服务 update-rc.d ssh enable //开启自启动ssh服务 任务二 修改配置文件 vi /etc/ssh/ssh_config //第一…...

2025 后端自学UNIAPP【项目实战:旅游项目】6、我的收藏页面

代码框架视图 1、先添加一个获取收藏景点的列表请求 【在文件my_api.js文件中添加】 // 引入公共的请求封装 import http from ./my_http.js// 登录接口&#xff08;适配服务端返回 Token&#xff09; export const login async (code, avatar) > {const res await http…...

【C语言练习】080. 使用C语言实现简单的数据库操作

080. 使用C语言实现简单的数据库操作 080. 使用C语言实现简单的数据库操作使用原生APIODBC接口第三方库ORM框架文件模拟1. 安装SQLite2. 示例代码:使用SQLite创建数据库、表和插入数据3. 编译和运行4. 示例运行输出:5. 注意事项6. 总结080. 使用C语言实现简单的数据库操作 在…...

在 Spring Boot 项目里,MYSQL中json类型字段使用

前言&#xff1a; 因为程序特殊需求导致&#xff0c;需要mysql数据库存储json类型数据&#xff0c;因此记录一下使用流程 1.java实体中新增字段 private List<User> users 2.增加mybatis-plus注解 TableField(typeHandler FastjsonTypeHandler.class) private Lis…...

【Kafka】Kafka从入门到实战:构建高吞吐量分布式消息系统

Kafka从入门到实战:构建高吞吐量分布式消息系统 一、Kafka概述 Apache Kafka是一个分布式流处理平台,最初由LinkedIn开发,后成为Apache顶级项目。它被设计用于高吞吐量、低延迟的消息处理,能够处理来自多个生产者的海量数据,并将这些数据实时传递给消费者。 Kafka核心特…...

32单片机——基本定时器

STM32F103有众多的定时器&#xff0c;其中包括2个基本定时器&#xff08;TIM6和TIM7&#xff09;、4个通用定时器&#xff08;TIM2~TIM5&#xff09;、2个高级控制定时器&#xff08;TIM1和TIM8&#xff09;&#xff0c;这些定时器彼此完全独立&#xff0c;不共享任何资源 1、定…...

《信号与系统》第 6 章 信号与系统的时域和频域特性

目录 6.0 引言 6.1 傅里叶变换的模和相位表示 6.2 线性时不变系统频率响应的模和相位表示 6.2.1 线性与非线性相位 6.2.2 群时延 6.2.3 对数模和相位图 6.3 理想频率选择性滤波器的时域特性 6.4 非理想滤波器的时域和频域特性讨论 6.5 一阶与二阶连续时间系统 6.5.1 …...

倒装芯片凸点成型工艺

UBM&#xff08;Under Bump Metallization&#xff09;与Bump&#xff08;焊球&#xff09;形成工艺流程。我们可以将整张流程图分为三大阶段来理解&#xff1a; &#x1f527; 一、UBM&#xff08;Under Bump Metallization&#xff09;工艺流程&#xff08;黄色区域&#xff…...

GeoServer发布PostgreSQL图层后WFS查询无主键字段

在使用 GeoServer&#xff08;版本 2.22.2&#xff09; 发布 PostgreSQL&#xff08;PostGIS&#xff09;中的表为地图服务时&#xff0c;常常会遇到一个小问题&#xff1a; WFS 查询中&#xff0c;主键字段&#xff08;如 id&#xff09;莫名其妙地消失了&#xff01; 即使你在…...