当前位置: 首页 > news >正文

3GPP TS38.201 NR; Physical layer; General description (Release 18)

TS38.201是介绍性的标准,简单介绍了RAN的信道组成和PHY层承担的功能,下图是PHY层相关标准的关系。
在这里插入图片描述

文章目录

  • 结构
  • 信道类型
  • 调制方式
  • PHY层支持的过程
  • 物理层测量
  • 其他标准
    • TS 38.202: Physical layer services provided by the physical layer
    • TS 38.211: Physical channels and modulation
    • TS 38.212: Multiplexing and channel coding
    • TS 38.213: Physical layer procedures for control
    • TS 38.214: Physical layer procedures for data
    • TS 38.215: Physical layer measurements
    • TS 37.213: Physical layer procedures for shared spectrum channel access

结构

如图所示,不同层/子层之间的圆圈表示服务接入点(SAP),其中L2包括MAC,RLC,PDCP和SDAP。
在这里插入图片描述
PHY为MAC提供传输信道(信息如何通过无线电接口传输),MAC为RLC提供逻辑信道(所传输信息的类型),RLC为PDCP提供RLC信道,PDCP为上层提供无线承载,SDAP提供QoS Flow级别服务。

信道类型

The physical channels defined in the downlink are:

  • the Physical Downlink Shared Channel (PDSCH),
  • the Physical Downlink Control Channel (PDCCH),
  • the Physical Broadcast Channel (PBCH),

The physical channels defined in the uplink are:

  • the Physical Random Access Channel (PRACH),
  • the Physical Uplink Shared Channel (PUSCH),
  • the Physical Uplink Control Channel (PUCCH).

The physical channels defined in the sidelink are:

  • the Physical Sidelink Broadcast Channel (PSBCH),
  • the Physical Sidelink Control Channel (PSCCH),
  • the Physical Sidelink Feedback Channel (PSFCH),
  • the Physical Sidelink Shared Channel (PSSCH).

In addition, signals are defined as reference signals, primary and secondary synchronization signals.

调制方式

The modulation schemes supported are

  • in the downlink, QPSK, 16QAM, 64QAM, 256QAM, and 1024QAM,
  • in the uplink, QPSK, 16QAM, 64QAM and 256QAM for OFDM with a CP and π/2-BPSK, QPSK, 16QAM,64QAM and 256QAM for DFT-s-OFDM with a CP.

PHY层支持的过程

  • Cell search
  • Power control
  • Uplink synchronisation and Uplink timing control
  • Random access related procedures
  • HARQ related procedures
  • Beam management and CSI related procedures
  • Sidelink related procedures
  • Channel access procedures

物理层测量

Radio characteristics are measured by the UE and the network and reported to higher layers.
These include, e.g.measurements for intra- and inter-frequency handover, inter RAT handover, timing measurements, and measurementsfor RRM.

其他标准

TS 38.202: Physical layer services provided by the physical layer

  • Services and functions of the physical layer;
  • Model of physical layer of the UE;
  • Parallel transmission of simultaneous physical channels and SRS;
  • Measurements provided by the physical layer.5.4

TS 38.211: Physical channels and modulation

  • Definition of the uplink, downlink and sidelink physical channels;
  • Frame structure and physical resources;
  • Modulation mapping (BPSK, QPSK, etc);
  • OFDM signal generation;
  • Scrambling, modulation and upconversion;
  • Layer mapping and precoding;
  • Physical shared channel in uplink, downlink and sidelink;
  • Reference signal in uplink, downlink and sidelink;
  • Physical random access channel;
  • Primary and secondary synchronization signals.

TS 38.212: Multiplexing and channel coding

  • Channel coding schemes;
  • Rate matching;
  • Uplink transport channels and control information;
  • Downlink transport channels and control information;
  • Sidelink transport channels and control information.

TS 38.213: Physical layer procedures for control

  • Synchronization procedures;
  • Uplink power control;
  • Random access procedure;
  • UE procedure for reporting control information;
  • UE procedure for receiving control information.

TS 38.214: Physical layer procedures for data

  • Power control;
  • Physical downlink shared channel related procedures;
  • Physical uplink shared channel related procedure;
  • Physical sidelink shared channel related procedure.

TS 38.215: Physical layer measurements

  • Control of UE/NG-RAN measurements;
  • Measurement capabilities for NR.

TS 37.213: Physical layer procedures for shared spectrum channel access

  • Downlink channel access procedures;
  • Uplink channel access procedures;
  • Sidelink channel access procedures.

相关文章:

3GPP TS38.201 NR; Physical layer; General description (Release 18)

TS38.201是介绍性的标准,简单介绍了RAN的信道组成和PHY层承担的功能,下图是PHY层相关标准的关系。 文章目录 结构信道类型调制方式PHY层支持的过程物理层测量其他标准TS 38.202: Physical layer services provided by the physical layerTS 38.211: Ph…...

【GitLab】-HTTP 500 curl 22 The requested URL returned error: 500~SSH解决

写在前面 本文主要介绍通过SSH的方式拉取GitLab代码。 目录 写在前面一、场景描述二、具体步骤1.环境说明2.生成秘钥3.GitLab添加秘钥4.验证SSH方式4.更改原有HTTP方式为SSH 三、参考资料写在后面系列文章 一、场景描述 之前笔者是通过 HTTP Personal access token 的方式拉取…...

【如何学习Python自动化测试】—— 自动化测试环境搭建

1、 自动化测试环境搭建 1.1 为什么选择 Python 什么是python,引用python官方的说法就是“一种解释型的、面向对象、带有励志语义的高级程序设计语言”,对于很多测试人员来说,这段话包含了很多术语,而测试人员大多是希望利用编程…...

在通用jar包中引入其他spring boot starter,并在通用jar包中直接配置这些starter的yml相关属性

场景 我在通用jar包中引入 spring-boot-starter-actuator 这样希望引用通用jar的所有服务都可以直接使用 actuator 中的功能, 问题在于,正常情况下,actuator的配置都写在每个项目的yml文件中,这就意味着,虽然每个项目…...

Seaborn 回归(Regression)及矩阵(Matrix)绘图

Seaborn中的回归包括回归拟合曲线图以及回归误差图。Matrix图主要是热度图。 1. 回归及矩阵绘图API概述 seaborn中“回归”绘图函数共3个: lmplot(回归统计绘图):figure级regplot函数,绘图同regplot完全相同。(lm指lin…...

nginx学习(1)

一、下载安装NGINX: 先安装gcc-c编译器 yum install gcc-c yum install -y openssl openssl-devel(1)下载pcre-8.3.7.tar.gz 直接访问:http://downloads.sourceforge.net/project/pcre/pcre/8.37/pcre-8.37.tar.gz,就…...

CLEARTEXT communication to XX not permitted by network security policy 报错

在进行网络请求时,日志中打印 CLEARTEXT communication to XX not permitted by network security policy 原因: Android P系统网络访问安全策略升级,限制了非加密的流量请求 Android P系统限制了明文流量的网络请求,之下的版本…...

91.移动零(力扣)

问题描述 代码解决以及思想 class Solution { public:void moveZeroes(vector<int>& nums) {int left 0; // 左指针&#xff0c;用于指向当前非零元素应该放置的位置int right 0; // 右指针&#xff0c;用于遍历数组int len nums.size(); // 数组长度while …...

PatchMatchNet笔记

PatchMatchNet笔记 1 概述2 PatchmatchNet网络结构图2.1 多尺度特征提取2.2 基于学习的补丁匹配 3 性能评价 PatchmatchNet: Learned Multi-View Patchmatch Stereo&#xff1a;基于学习的多视角补丁匹配立体算法 1 概述 特点   高速&#xff0c;低内存&#xff0c;可以处理…...

实时人眼追踪、内置3D引擎,联想ThinkVision裸眼3D显示器创新四大应用场景

11月17日&#xff0c;在以“因思而变 智领未来”为主题的Think Centre和ThinkVision 20周年纪念活动上&#xff0c;联想正式发布了业内首款2D/3D 可切换裸眼3D显示器——联想ThinkVision 27 3D。该产品首次将裸眼2D、3D可切换技术应用在显示器领域&#xff0c;并拓展了3D技术多…...

SELinux零知识学习十四、SELinux策略语言之客体类别和许可(8)

接前一篇文章&#xff1a;SELinux零知识学习十三、SELinux策略语言之客体类别和许可&#xff08;7&#xff09; 一、SELinux策略语言之客体类别和许可 4. 客体类别许可实例 &#xff08;2&#xff09;文件客体类别许可 文件客体类别有三类许可&#xff1a;直接映像到标准Lin…...

Unity——URP相机详解

2021版本URP项目下的相机&#xff0c;一般新建一个相机有如下组件 1:Render Type(渲染类型) 有Base和Overlay两种选项&#xff0c;默认是Base选项 Base:主相机使用该种渲染方式&#xff0c;负责渲染场景中的主要图形元素 Overlay&#xff08;叠加&#xff09;:使用了Oveylay的…...

CRUD-SQL

文章目录 前置insertSelective和upsertSelective使用姿势手写sql&#xff0c;有两种方式 一、增当导入的数据不存在时则进行添加&#xff0c;有则更新 1.1 唯一键&#xff0c;先查&#xff0c;后插1.2 批量插1.2.1 批次一200、批次二200、批次三200&#xff0c;有一条数据写入失…...

【C语言 | 数组】C语言数组详解(经典,超详细)

&#x1f601;博客主页&#x1f601;&#xff1a;&#x1f680;https://blog.csdn.net/wkd_007&#x1f680; &#x1f911;博客内容&#x1f911;&#xff1a;&#x1f36d;嵌入式开发、Linux、C语言、C、数据结构、音视频&#x1f36d; &#x1f923;本文内容&#x1f923;&a…...

第三十三节——组合式API生命周期

一、基本使用 组合式api生命周期几乎和选项式一致。注意组合式api是从挂载阶段开始 <template><div></div> </template> <script setup> import {onBeforeMount, onMounted,onBeforeUpdate, onUpdated, onBeforeUnmount, onUnmounted, } from …...

【Linux】Alibaba Cloud Linux 3 安装 PHP8.1

一、系统安装 请参考 【Linux】Alibaba Cloud Linux 3 中第二硬盘、MySQL8.、MySQL7.、Redis、Nginx、Java 系统安装 二、安装源 rpm -ivh --nodeps https://rpms.remirepo.net/enterprise/remi-release-8.rpm sed -i s/PLATFORM_ID"platform:al8"/PLATFORM_ID&q…...

【容器化】Kubernetes(k8s)

文章目录 概述Docker 的管理痛点什么是 K8s云架构 & 云原生 架构核心组件K8s 的服务注册与发现组件调用流程部署单机版部署主从版本Operator来源拓展阅读 概述 Docker 虽好用&#xff0c;但面对强大的集群&#xff0c;成千上万的容器&#xff0c;突然感觉不香了。 这时候就…...

stm32 HSUSB

/ stm32f407xx.h #define USB_OTG_HS_PERIPH_BASE 0x40040000UL #define USB_OTG_HS ((USB_OTG_GlobalTypeDef *) USB_OTG_HS_PERIPH_BASE) // // 定义全局变量 USBD_HandleTypeDef hUsbDeviceHS;并默认全零初始化/* USB Device handle structure */ typedef struct _USB…...

C# String.Trim 方法

String.Trim()方法定义&#xff1a; 命名空间&#xff1a;System 程序集&#xff1a;System.Runtime.dll 返回结果&#xff1a;返回一个新字符串&#xff0c;它相当于从当前字符串中删除了一组指定字符的所有前导匹配项和尾随匹配项。 Trim方法有三个重载的方法&#xff0c;…...

<Linux>(极简关键、省时省力)《Linux操作系统原理分析之Linux 进程管理 4》(8)

《Linux操作系统原理分析之Linux 进程管理 4》&#xff08;8&#xff09; 4 Linux 进程管理4.4 Linux 进程的创建和撤销4.4.1 Linux 进程的族亲关系4.4.2 Linux 进程的创建4.4.3 Linux 进程创建的过程4.4.4 Linux 进程的执行4.4.5 Linux 进程的终止和撤销 4 Linux 进程管理 4.…...

OpenLayers 可视化之热力图

注&#xff1a;当前使用的是 ol 5.3.0 版本&#xff0c;天地图使用的key请到天地图官网申请&#xff0c;并替换为自己的key 热力图&#xff08;Heatmap&#xff09;又叫热点图&#xff0c;是一种通过特殊高亮显示事物密度分布、变化趋势的数据可视化技术。采用颜色的深浅来显示…...

【杂谈】-递归进化:人工智能的自我改进与监管挑战

递归进化&#xff1a;人工智能的自我改进与监管挑战 文章目录 递归进化&#xff1a;人工智能的自我改进与监管挑战1、自我改进型人工智能的崛起2、人工智能如何挑战人类监管&#xff1f;3、确保人工智能受控的策略4、人类在人工智能发展中的角色5、平衡自主性与控制力6、总结与…...

云计算——弹性云计算器(ECS)

弹性云服务器&#xff1a;ECS 概述 云计算重构了ICT系统&#xff0c;云计算平台厂商推出使得厂家能够主要关注应用管理而非平台管理的云平台&#xff0c;包含如下主要概念。 ECS&#xff08;Elastic Cloud Server&#xff09;&#xff1a;即弹性云服务器&#xff0c;是云计算…...

基于距离变化能量开销动态调整的WSN低功耗拓扑控制开销算法matlab仿真

目录 1.程序功能描述 2.测试软件版本以及运行结果展示 3.核心程序 4.算法仿真参数 5.算法理论概述 6.参考文献 7.完整程序 1.程序功能描述 通过动态调整节点通信的能量开销&#xff0c;平衡网络负载&#xff0c;延长WSN生命周期。具体通过建立基于距离的能量消耗模型&am…...

ssc377d修改flash分区大小

1、flash的分区默认分配16M、 / # df -h Filesystem Size Used Available Use% Mounted on /dev/root 1.9M 1.9M 0 100% / /dev/mtdblock4 3.0M...

基于uniapp+WebSocket实现聊天对话、消息监听、消息推送、聊天室等功能,多端兼容

基于 ​UniApp + WebSocket​实现多端兼容的实时通讯系统,涵盖WebSocket连接建立、消息收发机制、多端兼容性配置、消息实时监听等功能,适配​微信小程序、H5、Android、iOS等终端 目录 技术选型分析WebSocket协议优势UniApp跨平台特性WebSocket 基础实现连接管理消息收发连接…...

线程与协程

1. 线程与协程 1.1. “函数调用级别”的切换、上下文切换 1. 函数调用级别的切换 “函数调用级别的切换”是指&#xff1a;像函数调用/返回一样轻量地完成任务切换。 举例说明&#xff1a; 当你在程序中写一个函数调用&#xff1a; funcA() 然后 funcA 执行完后返回&…...

渲染学进阶内容——模型

最近在写模组的时候发现渲染器里面离不开模型的定义,在渲染的第二篇文章中简单的讲解了一下关于模型部分的内容,其实不管是方块还是方块实体,都离不开模型的内容 🧱 一、CubeListBuilder 功能解析 CubeListBuilder 是 Minecraft Java 版模型系统的核心构建器,用于动态创…...

如何为服务器生成TLS证书

TLS&#xff08;Transport Layer Security&#xff09;证书是确保网络通信安全的重要手段&#xff0c;它通过加密技术保护传输的数据不被窃听和篡改。在服务器上配置TLS证书&#xff0c;可以使用户通过HTTPS协议安全地访问您的网站。本文将详细介绍如何在服务器上生成一个TLS证…...

从零开始打造 OpenSTLinux 6.6 Yocto 系统(基于STM32CubeMX)(九)

设备树移植 和uboot设备树修改的内容同步到kernel将设备树stm32mp157d-stm32mp157daa1-mx.dts复制到内核源码目录下 源码修改及编译 修改arch/arm/boot/dts/st/Makefile&#xff0c;新增设备树编译 stm32mp157f-ev1-m4-examples.dtb \stm32mp157d-stm32mp157daa1-mx.dtb修改…...