kubeadm快速搭建k8s高可用集群

1.安装及优化

1.1基本环境配置

1.环境介绍
（1）.高可用集群规划

主机名	ip地址	说明
k8s-master01	192.168.2.96	master节点
k8s-master02	192.168.2.97	master节点
k8s-master03	192.168.2.98	master节点
k8s-node01	192.168.2.99	node节点
k8s-node02	192.168.2.100	node节点
k8s-master-vip	192.168.2.236	keepalived虚拟ip

（2）.网段规划

网段名称	网段划分
宿主机网段	192.168.2.1/24
Pod网段	172.16.0.0/12
Service网段	10.0.0.0/16

2.配置信息

配置信息	备注
系统版本	centos7.9
Docker版本	20.10x
kubeadm版本	v1.23.17

cat /etc/redhat-release 
CentOS Linux release 7.9.2009 (Core)docker --version
Docker version 20.10.21, build baeda1fkubeadm version
kubeadm version: &version.Info{Major:"1", Minor:"23", GitVersion:"v1.23.17", GitCommit:"953be8927218ec8067e1af2641e540238ffd7576", GitTreeState:"clean", BuildDate:"2023-02-22T13:33:14Z", GoVersion:"go1.19.6", Compiler:"gc", Platform:"linux/amd64"}

注意事项:宿主机网段、K8s Service网段、Pod网段不能重复!!!
3.修改主机名
(1)根据规划信息在每台机器上修改主机名

hostnamectl set-hostname k8s-master01
hostnamectl set-hostname k8s-master02
hostnamectl set-hostname k8s-master03
hostnamectl set-hostname k8s-node01
hostnamectl set-hostname k8s-node02

4.修改hosts文件
（1）安装vim编辑器，如果已安装则可忽略

yum insytall vim -y

（2）修改每台机器的hosts文件
vim /etc/hosts

192.168.2.96 k8s-master01
192.168.2.97 k8s-master02
192.168.2.98 k8s-master03
192.168.2.236 k8s-master-vip 
192.168.2.99 k8s-node01
192.168.2.100 k8s-node02

注意事项:如果不是高可用集群，上面VIP为Master01的IP！！！

5.安装yum源

(1)在每台机器上执行以下命令配置默认yum源并安装依赖

curl -o /etc/yum.repos.d/CentOS-Base.repo https://mirrors.aliyun.com/repo/Centos-7.repo
yum install -y yum-utils device-mapper-persistent-data lvm2

(2)在每台机器上执行以下命令配置Docker的yum源

yum-config-manager --add-repo https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo

(3)在每台机器上执行以下命令配置kubernetes的yum源

cat <<EOF > /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/
enabled=1
gpgcheck=0
repo_gpgcheck=0
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF

sed -i -e '/mirrors.cloud.aliyuncs.com/d' -e '/mirrors.aliyuncs.com/d' /etc/yum.repos.d/CentOS-Base.repo

6.必备工具安装

(1)在每台机器上执行以下命令安装必备工具

yum install wget jq psmisc vim net-tools telnet yum-utils device-mapper-persistent-data lvm2 git -y

7.关闭防火墙、swap分区、dnsmasq、selinux

(1)在每台机器上执行以下命令关闭防火墙

systemctl disable --now firewalld

(2)在每台机器上执行以下命令关闭selinux

 setenforce 0sed -i 's#SELINUX=enforcing#SELINUX=disabled#g' /etc/sysconfig/selinuxsed -i 's#SELINUX=enforcing#SELINUX=disabled#g' /etc/selinux/config

(3)在每台机器上执行以下命令关闭dnsmasq

systemctl disable --now dnsmasq

Failed to execute operation: No such file or directory
注意:这里如果是通过VMware虚拟机实践的，会因为没有这个服务而报错!!!

(4)在每台机器上执行以下命令关闭NetworkManager

systemctl disable --now NetworkManager

注意:公有云不要关闭NetworkManager!!!

(5)在每台机器上执行以下命令关闭swap分区

临时关闭

 swapoff -a && sysctl -w vm.swappiness=0

永久关闭

 sed -ri '/^[^#]*swap/s@^@#@' /etc/fstab

8.时钟同步

(1)在每台机器上执行以下命令安装ntpdate

 rpm -ivh http://mirrors.wlnmp.com/centos/wlnmp-release-centos.noarch.rpmyum install ntpdate -y

(2)在每台机器上执行以下命令同步时间

 ln -sf /usr/share/zoneinfo/Asia/Shanghai /etc/localtimeecho 'Asia/Shanghai' >/etc/timezonentpdate time2.aliyun.com

#添加定时任务

 crontab -e
*/5 * * * * /usr/sbin/ntpdate time2.aliyun.com

9.配置limit

(1)在每台机器上执行以下命令配置limit

ulimit -SHn 65535

vim /etc/security/limits.conf
末尾添加以下内容
* soft nofile 65536
* hard nofile 131072
* soft nproc 65535
* hard nproc 655350
* soft memlock unlimited
* hard memlock unlimited

10.Master01节点配置免密钥登录

(1)在Master01节点上配置如下命令，使其免密钥登录其他节点

ssh-keygen -t rsa #按3次回车即可
for i in k8s-master01 k8s-master02 k8s-master03 k8s-node01 k8s-node02;do ssh-copy-id -i .ssh/id_rsa.pub $i;done

注意:此操作结束后会提示输入4次其他节点的密码!!!
(2)在Master01节点上远程登录k8s-node02节点进行测试，发现测试成功

ssh k8s-node02

11.下载源码文件

(1)在Master01节点上下载源码文件

git clone https://gitee.com/jeckjohn/k8s-ha-install.git

(2)在Master01节点上执行以下命令查看分支

cd k8s-ha-install
git branch -a

[root@192 k8s-ha-install]# git branch -a
* masterremotes/origin/HEAD -> origin/masterremotes/origin/manual-installationremotes/origin/manual-installation-v1.16.xremotes/origin/manual-installation-v1.17.xremotes/origin/manual-installation-v1.18.xremotes/origin/manual-installation-v1.19.xremotes/origin/manual-installation-v1.20.xremotes/origin/manual-installation-v1.20.x-csi-hostpathremotes/origin/manual-installation-v1.21.xremotes/origin/manual-installation-v1.22.xremotes/origin/manual-installation-v1.23.xremotes/origin/manual-installation-v1.24.xremotes/origin/manual-installation-v1.25.xremotes/origin/manual-installation-v1.26.xremotes/origin/manual-installation-v1.27.xremotes/origin/manual-installation-v1.28.xremotes/origin/master

1.2内核升级

centos7.9内核升级

1.3Containerd作为Runtime

如果安装的版本低于1.24，选择Docker和Containerd均可，高于1.24选择Containerd作为Runtime。

1.在每台机器上执行以下命令安装docker-ce-20.10,注意这里安装docker时会把Containerd也装上

yum install docker-ce-20.10.* docker-ce-cli-20.10.* -y

2.在每台机器上执行以下命令配置Containerd所需的模块

cat <<EOF | sudo tee /etc/modules-load.d/containerd.conf
overlay
br_netfilter
EOF

3.在每台机器上执行以下命令加载模块

modprobe -- overlay
modprobe -- br_netfilter

4.在每台机器上执行以下命令配置Containerd所需的内核

cat <<EOF | sudo tee /etc/sysctl.d/99-kubernetes-cri.conf
net.bridge.bridge-nf-call-iptables  = 1
net.ipv4.ip_forward                 = 1
net.bridge.bridge-nf-call-ip6tables = 1
EOF

5.在每台机器上执行以下命令加载内核

sysctl --system

6.在每台机器上执行以下命令配置Containerd的配置文件

mkdir -p /etc/containerd
containerd config default | tee /etc/containerd/config.toml

7.在每台机器上执行以下命令将Containerd的Cgroup改为Systemd,找到containerd.runtimes.runc.options，添加SystemdCgroup = true（如果已存在直接修改，否则会报错）

vim /etc/containerd/config.toml
...
...
[plugins."io.containerd.grpc.v1.cri".containerd.runtimes.runc.options]BinaryName = ""CriuImagePath = ""CriuPath = ""CriuWorkPath = ""IoGid = 0IoUid = 0NoNewKeyring = falseNoPivotRoot = falseRoot = ""ShimCgroup = ""SystemdCgroup = true

8.在每台机器上执行以下命令将sandbox_image的Pause镜像改成符合自己版本的地址http://registry.cn-hangzhou.aliyuncs.com/google_containers/pause:3.6

vim /etc/containerd/config.toml#原本内容
sandbox_image = "registry.k8s.io/pause:3.6"
#修改后的内容
sandbox_image = "registry.cn-hangzhou.aliyuncs.com/google_containers/pause:3.6"

9.在每台机器上执行以下命令启动Containerd，并配置开机自启动

systemctl daemon-reload
systemctl enable --now containerd
ls /run/containerd/containerd.sock /run/containerd/containerd.sock

10.在每台机器上执行以下命令配置crictl客户端连接的运行时位置

cat > /etc/crictl.yaml <<EOF
runtime-endpoint: unix:///run/containerd/containerd.sock
image-endpoint: unix:///run/containerd/containerd.sock
timeout: 10
debug: false
EOF

11.在每台机器上执行以下命令进行验证

ctr image ls
REF TYPE DIGEST SIZE PLATFORMS LABELS

1.4安装Kubernetes组件Kubeadm&Kubelet

1.在Master01节点查看最新的Kubernetes版本是多少

yum list kubeadm.x86_64 --showduplicates | sort -r

2.在每台机器上执行以下命令安装1.23最新版本kubeadm、kubelet和kubectl

yum install kubeadm-1.23* kubelet-1.23* kubectl-1.23* -y

查看版本
kubeadm version

3.在每台机器上执行以下命令更改Kubelet的配置使用Containerd作为Runtime，如果选择的是docker作为的Runtime,则不需要进行更改

cat >/etc/sysconfig/kubelet<<EOF
KUBELET_KUBEADM_ARGS="--container-runtime=remote --runtime-request-timeout=15m --container-runtime-endpoint=unix:///run/containerd/containerd.sock"
EOF

4.在每台机器上执行以下命令设置Kubelet开机自启动（由于还未初始化，没有kubelet的配置文件，此时kubelet无法启动，无需管理）

systemctl daemon-reload
systemctl enable --now kubeletsystemctl status kubelet

说明:由于还未初始化，没有kubelet的配置文件，此时kubelet无法启动，无需管理

1.5高可用组件安装

公有云要用公有云自带的负载均衡，比如阿里云的SLB，腾讯云的ELB，用来替代haproxy和keepalived，因为公有云大部分都是不支持keepalived的，另外如果用阿里云的话，kubectl控制端不能放在master节点，推荐使用腾讯云，因为阿里云的slb有回环的问题，也就是slb代理的服务器不能反向访问SLB，但是腾讯云修复了这个问题。

注意:如果不是高可用集群，haproxy和keepalived无需安装!!!
1.安装HAProxy

(1)所有Master节点通过yum安装HAProxy和KeepAlived

yum install keepalived haproxy -y

(2)所有Master节点配置HAProxy,所有Master节点的HAProxy配置相同

mkdir /etc/haproxy
vim /etc/haproxy/haproxy.cfgglobalmaxconn 2000ulimit-n 16384log 127.0.0.1 local0 errstats timeout 30sdefaultslog globalmode httpoption httplogtimeout connect 5000timeout client 50000timeout server 50000timeout http-request 15stimeout http-keep-alive 15sfrontend monitor-inbind *:33305mode httpoption httplogmonitor-uri /monitorfrontend k8s-masterbind 0.0.0.0:16443bind 127.0.0.1:16443mode tcpoption tcplogtcp-request inspect-delay 5sdefault_backend k8s-masterbackend k8s-mastermode tcpoption tcplogoption tcp-checkbalance roundrobindefault-server inter 10s downinter 5s rise 2 fall 2 slowstart 60s maxconn 250 maxqueue 256 weight 100server k8s-master01 192.168.2.96:6443 checkserver k8s-master02 192.168.2.97:6443 checkserver k8s-master03 192.168.2.98:6443 check

(3)所有Master节点重启HAProxy，并验证端口16443

systemctl restart haproxy
netstat -lntp | grep 16443
tcp        0      0 127.0.0.1:16443         0.0.0.0:*               LISTEN      1075/haproxy        
tcp        0      0 0.0.0.0:16443           0.0.0.0:*

2.安装KeepAlived

所有Master节点配置KeepAlived，配置不一样，注意区分每个节点的IP和网卡（interface参数）

(1)Master01节点的配置如下

! Configuration File for keepalived
global_defs {router_id LVS_DEVELscript_user rootenable_script_security
}
vrrp_script chk_apiserver {script "/etc/keepalived/check_apiserver.sh"interval 5weight -5fall 2rise 1
}
vrrp_instance VI_1 {state MASTERinterface ens33mcast_src_ip 192.168.2.96virtual_router_id 51priority 101advert_int 2authentication {auth_type PASSauth_pass K8SHA_KA_AUTH}virtual_ipaddress {192.168.2.236}track_script {chk_apiserver}
}

(2)Master02节点的配置如下

! Configuration File for keepalived
global_defs {router_id LVS_DEVELscript_user rootenable_script_security
}
vrrp_script chk_apiserver {script "/etc/keepalived/check_apiserver.sh"interval 5weight -5fall 2rise 1
}
vrrp_instance VI_1 {state MASTERinterface ens33mcast_src_ip 192.168.2.97virtual_router_id 51priority 101advert_int 2authentication {auth_type PASSauth_pass K8SHA_KA_AUTH}virtual_ipaddress {192.168.2.236}track_script {chk_apiserver}
}

(3)Master03节点的配置如下

! Configuration File for keepalived
global_defs {router_id LVS_DEVELscript_user rootenable_script_security
}
vrrp_script chk_apiserver {script "/etc/keepalived/check_apiserver.sh"interval 5weight -5fall 2rise 1
}
vrrp_instance VI_1 {state MASTERinterface ens33mcast_src_ip 192.168.2.98virtual_router_id 51priority 101advert_int 2authentication {auth_type PASSauth_pass K8SHA_KA_AUTH}virtual_ipaddress {192.168.2.236}track_script {chk_apiserver}
}

(4)所有master节点配置KeepAlived健康检查文件

vim /etc/keepalived/check_apiserver.sh 
#!/bin/bash#初始化错误计数器
err=0
#循环三次检查HAProxy进程是否在运行
for k in $(seq 1 3)
docheck_code=$(pgrep haproxy)if [[ $check_code == "" ]]; then#如果未找到进程，增加错误计数器并等待一秒钟err=$(expr $err + 1)sleep 1continueelse#如果找到进程，重置错误计数器并退出循环err=0breakfi
done#根据错误计数器的值，决定是否停止keepalived服务并退出脚本
if [[ $err != "0" ]]; thenecho "systemctl stop keepalived"/usr/bin/systemctl stop keepalivedexit 1
elseexit 0
fi#赋权
chmod +x /etc/keepalived/check_apiserver.sh

3.所有master节点启动haproxy和keepalived

systemctl daemon-reload
systemctl enable --now haproxy
systemctl enable --now keepalived

4.测试VIP,验证keepalived是否是正常

ping 192.168.2.236 -c 4

2.集群搭建

2.1Master节点初始化

1.Master01节点创建kubeadm-config.yaml配置文件如下

vim kubeadm-config.yaml
apiVersion: kubeadm.k8s.io/v1beta2
bootstrapTokens:
- groups:- system:bootstrappers:kubeadm:default-node-tokentoken: 7t2weq.bjbawausm0jaxuryttl: 24h0m0susages:- signing- authentication
kind: InitConfiguration
localAPIEndpoint:advertiseAddress: 192.168.2.96 #Master01节点的IP地址bindPort: 6443
nodeRegistration:criSocket: /run/containerd/containerd.sock name: k8s-master01taints:- effect: NoSchedulekey: node-role.kubernetes.io/master---
apiServer:certSANs:- 192.168.2.236 #VIP地址/公有云的负载均衡地址timeoutForControlPlane: 4m0s
apiVersion: kubeadm.k8s.io/v1beta2
certificatesDir: /etc/kubernetes/pki
clusterName: kubernetes
controlPlaneEndpoint: 192.168.2.236:16443
controllerManager: {}
dns:type: CoreDNS
etcd:local:dataDir: /var/lib/etcd
imageRepository: registry.cn-hangzhou.aliyuncs.com/google_containers
kind: ClusterConfiguration
kubernetesVersion: v1.23.17 #此处版本号和kubeadm版本一致
networking:dnsDomain: cluster.localpodSubnet: 172.16.0.0/12serviceSubnet: 10.0.0.0/16
scheduler: {}

2.Master01节点上更新kubeadm文件

kubeadm config migrate --old-config kubeadm-config.yaml --new-config new.yaml

3.在Master01节点上将new.yaml文件复制到其他master节点

for i in k8s-master02 k8s-master03; do scp new.yaml $i:/root/; done

4.所有Master节点提前下载镜像，可以节省初始化时间（其他节点不需要更改任何配置，包括IP地址也不需要更改）

kubeadm config images pull --config /root/new.yaml

5.所有节点设置开机自启动kubelet

systemctl enable --now kubelet

6.Master01节点初始化，初始化以后会在/etc/kubernetes目录下生成对应的证书和配置文件，之后其他Master节点加入Master01即可

kubeadm init --config /root/new.yaml  --upload-certs

正常执行成功后可以输出如下日志

[root@k8s-master01 ~]# kubeadm init --config /root/new.yaml  --upload-certs
[init] Using Kubernetes version: v1.23.17
[preflight] Running pre-flight checks
[preflight] Pulling images required for setting up a Kubernetes cluster
[preflight] This might take a minute or two, depending on the speed of your internet connection
[preflight] You can also perform this action in beforehand using 'kubeadm config images pull'
[certs] Using certificateDir folder "/etc/kubernetes/pki"
[certs] Generating "ca" certificate and key
[certs] Generating "apiserver" certificate and key
[certs] apiserver serving cert is signed for DNS names [k8s-master01 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.0.0.1 192.168.2.96 192.168.2.236]
[certs] Generating "apiserver-kubelet-client" certificate and key
[certs] Generating "front-proxy-ca" certificate and key
[certs] Generating "front-proxy-client" certificate and key
[certs] Generating "etcd/ca" certificate and key
[certs] Generating "etcd/server" certificate and key
[certs] etcd/server serving cert is signed for DNS names [k8s-master01 localhost] and IPs [192.168.2.96 127.0.0.1 ::1]
[certs] Generating "etcd/peer" certificate and key
[certs] etcd/peer serving cert is signed for DNS names [k8s-master01 localhost] and IPs [192.168.2.96 127.0.0.1 ::1]
[certs] Generating "etcd/healthcheck-client" certificate and key
[certs] Generating "apiserver-etcd-client" certificate and key
[certs] Generating "sa" key and public key
[kubeconfig] Using kubeconfig folder "/etc/kubernetes"
[endpoint] WARNING: port specified in controlPlaneEndpoint overrides bindPort in the controlplane address
[kubeconfig] Writing "admin.conf" kubeconfig file
[endpoint] WARNING: port specified in controlPlaneEndpoint overrides bindPort in the controlplane address
[kubeconfig] Writing "kubelet.conf" kubeconfig file
[endpoint] WARNING: port specified in controlPlaneEndpoint overrides bindPort in the controlplane address
[kubeconfig] Writing "controller-manager.conf" kubeconfig file
[endpoint] WARNING: port specified in controlPlaneEndpoint overrides bindPort in the controlplane address
[kubeconfig] Writing "scheduler.conf" kubeconfig file
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Starting the kubelet
[control-plane] Using manifest folder "/etc/kubernetes/manifests"
[control-plane] Creating static Pod manifest for "kube-apiserver"
[control-plane] Creating static Pod manifest for "kube-controller-manager"
[control-plane] Creating static Pod manifest for "kube-scheduler"
[etcd] Creating static Pod manifest for local etcd in "/etc/kubernetes/manifests"
[wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory "/etc/kubernetes/manifests". This can take up to 4m0s
[apiclient] All control plane components are healthy after 22.532424 seconds
[upload-config] Storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace
[kubelet] Creating a ConfigMap "kubelet-config-1.23" in namespace kube-system with the configuration for the kubelets in the cluster
NOTE: The "kubelet-config-1.23" naming of the kubelet ConfigMap is deprecated. Once the UnversionedKubeletConfigMap feature gate graduates to Beta the default name will become just "kubelet-config". Kubeadm upgrade will handle this transition transparently.
[upload-certs] Storing the certificates in Secret "kubeadm-certs" in the "kube-system" Namespace
[upload-certs] Using certificate key:
3b03fabd6969ee744908335536f94e0ac11d15be87edd918d8ad08324ddfdbb2
[mark-control-plane] Marking the node k8s-master01 as control-plane by adding the labels: [node-role.kubernetes.io/master(deprecated) node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]
[mark-control-plane] Marking the node k8s-master01 as control-plane by adding the taints [node-role.kubernetes.io/master:NoSchedule]
[bootstrap-token] Using token: 7t2weq.bjbawausm0jaxury
[bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles
[bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to get nodes
[bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials
[bootstrap-token] configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token
[bootstrap-token] configured RBAC rules to allow certificate rotation for all node client certificates in the cluster
[bootstrap-token] Creating the "cluster-info" ConfigMap in the "kube-public" namespace
[kubelet-finalize] Updating "/etc/kubernetes/kubelet.conf" to point to a rotatable kubelet client certificate and key
[addons] Applied essential addon: CoreDNS
[endpoint] WARNING: port specified in controlPlaneEndpoint overrides bindPort in the controlplane address
[addons] Applied essential addon: kube-proxyYour Kubernetes control-plane has initialized successfully!To start using your cluster, you need to run the following as a regular user:mkdir -p $HOME/.kubesudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/configsudo chown $(id -u):$(id -g) $HOME/.kube/configAlternatively, if you are the root user, you can run:export KUBECONFIG=/etc/kubernetes/admin.confYou should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:https://kubernetes.io/docs/concepts/cluster-administration/addons/You can now join any number of the control-plane node running the following command on each as root:kubeadm join 192.168.2.236:16443 --token 7t2weq.bjbawausm0jaxury \--discovery-token-ca-cert-hash sha256:c5891bc7b53ee8e7548de96db1f4ed5ef353b77e572910f8aa3965040356701d \--control-plane --certificate-key 3b03fabd6969ee744908335536f94e0ac11d15be87edd918d8ad08324ddfdbb2Please note that the certificate-key gives access to cluster sensitive data, keep it secret!
As a safeguard, uploaded-certs will be deleted in two hours; If necessary, you can use
"kubeadm init phase upload-certs --upload-certs" to reload certs afterward.Then you can join any number of worker nodes by running the following on each as root:kubeadm join 192.168.2.236:16443 --token 7t2weq.bjbawausm0jaxury \--discovery-token-ca-cert-hash sha256:c5891bc7b53ee8e7548de96db1f4ed5ef353b77e572910f8aa3965040356701d

补充:

如果初始化失败，重置后再次初始化，命令如下（没有失败不要执行）

kubeadm reset -f ; ipvsadm --clear  ; rm -rf ~/.kube

7.Master01节点配置环境变量,用于访问Kubernetes集群

mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config#查看节点状态
kubectl get node
NAME           STATUS     ROLES                  AGE    VERSION
k8s-master01   NotReady   control-plane,master   4m5s   v1.23.17

2.2添加Master和Node到k8s集群

1.添加Master02节点和Master03节点到k8s集群

kubeadm join 192.168.2.236:16443 --token 7t2weq.bjbawausm0jaxury \--discovery-token-ca-cert-hash sha256:c5891bc7b53ee8e7548de96db1f4ed5ef353b77e572910f8aa3965040356701d \--control-plane --certificate-key 3b03fabd6969ee744908335536f94e0ac11d15be87edd918d8ad08324ddfdbb2

2.添加Node01节点和Node02节点到k8s集群

kubeadm join 192.168.2.236:16443 --token 7t2weq.bjbawausm0jaxury \--discovery-token-ca-cert-hash sha256:c5891bc7b53ee8e7548de96db1f4ed5ef353b77e572910f8aa3965040356701d

3.在Master01节点上查看节点状态

kubectl get node 
NAME           STATUS     ROLES                  AGE     VERSION
k8s-master01   NotReady   control-plane,master   7m11s   v1.23.17
k8s-master02   NotReady   control-plane,master   2m28s   v1.23.17
k8s-master03   NotReady   control-plane,master   102s    v1.23.17
k8s-node01     NotReady   <none>                 106s    v1.23.17
k8s-node02     NotReady   <none>                 84s     v1.23.17

2.3Calico组件安装

1.在Master01节点上进入相应分支目录

cd /root/k8s-ha-install && git checkout manual-installation-v1.23.x && cd calico/

2.提取Pod网段并赋值给变量

POD_SUBNET=`cat /etc/kubernetes/manifests/kube-controller-manager.yaml | grep cluster-cidr= | awk -F= '{print $NF}'`

3.修改calico.yaml文件

sed -i "s#POD_CIDR#${POD_SUBNET}#g" calico.yaml

4.安装Calico

kubectl apply -f calico.yaml

5.查看节点状态

kubectl get node 
NAME           STATUS   ROLES                  AGE   VERSION
k8s-master01   Ready    control-plane,master   9h    v1.23.17
k8s-master02   Ready    control-plane,master   9h    v1.23.17
k8s-master03   Ready    control-plane,master   9h    v1.23.17
k8s-node01     Ready    <none>                 9h    v1.23.17
k8s-node02     Ready    <none>                 9h    v1.23.17

6.查看pod状态,观察到所有pod都是running

kubectl get po -n kube-system
NAME                                       READY   STATUS    RESTARTS      AGE
calico-kube-controllers-6f6595874c-tntnr   1/1     Running   0             8m52s
calico-node-5mj9g                          1/1     Running   1 (41s ago)   8m52s
calico-node-hhjrv                          1/1     Running   2 (61s ago)   8m52s
calico-node-szjm7                          1/1     Running   0             8m52s
calico-node-xcgwq                          1/1     Running   0             8m52s
calico-node-ztbkj                          1/1     Running   1 (11s ago)   8m52s
calico-typha-6b6cf8cbdf-8qj8z              1/1     Running   0             8m52s
coredns-65c54cc984-nrhlg                   1/1     Running   0             9h
coredns-65c54cc984-xkx7w                   1/1     Running   0             9h
etcd-k8s-master01                          1/1     Running   1 (29m ago)   9h
etcd-k8s-master02                          1/1     Running   1 (29m ago)   9h
etcd-k8s-master03                          1/1     Running   1 (29m ago)   9h
kube-apiserver-k8s-master01                1/1     Running   1 (29m ago)   9h
kube-apiserver-k8s-master02                1/1     Running   1 (29m ago)   9h
kube-apiserver-k8s-master03                1/1     Running   2 (29m ago)   9h
kube-controller-manager-k8s-master01       1/1     Running   2 (29m ago)   9h
kube-controller-manager-k8s-master02       1/1     Running   1 (29m ago)   9h
kube-controller-manager-k8s-master03       1/1     Running   1 (29m ago)   9h
kube-proxy-7rmrs                           1/1     Running   1 (29m ago)   9h
kube-proxy-bmqhr                           1/1     Running   1 (29m ago)   9h
kube-proxy-l9rqg                           1/1     Running   1 (29m ago)   9h
kube-proxy-nn465                           1/1     Running   1 (29m ago)   9h
kube-proxy-sghfb                           1/1     Running   1 (29m ago)   9h
kube-scheduler-k8s-master01                1/1     Running   2 (29m ago)   9h
kube-scheduler-k8s-master02                1/1     Running   1 (29m ago)   9h
kube-scheduler-k8s-master03                1/1     Running   1 (29m ago)   9h

2.4Metrics部署

在新版的Kubernetes中系统资源的采集均使用Metrics-server，可以通过Metrics采集节点和Pod的内存、磁盘、CPU和网络的使用率。

1.将Master01节点的front-proxy-ca.crt复制到Node-01节点和Node-02节点

scp /etc/kubernetes/pki/front-proxy-ca.crt k8s-node01:/etc/kubernetes/pki/front-proxy-ca.crt
scp /etc/kubernetes/pki/front-proxy-ca.crt k8s-node02:/etc/kubernetes/pki/front-proxy-ca.crt

2.在Master01节点上操作安装metrics server

cd /root/k8s-ha-install/kubeadm-metrics-server
kubectl  create -f comp.yaml

3.在Master01节点上查看metrics-server部署情况

kubectl get po -n kube-system -l k8s-app=metrics-server
NAME                              READY   STATUS    RESTARTS   AGE
metrics-server-5cf8885b66-jdjtb   1/1     Running   0          115s

4.在Master01节点上查看node使用情况

kubectl top node 
NAME           CPU(cores)   CPU%   MEMORY(bytes)   MEMORY%   
k8s-master01   130m         0%     1019Mi          12%       
k8s-master02   102m         0%     1064Mi          13%       
k8s-master03   93m          0%     971Mi           12%       
k8s-node01     45m          0%     541Mi           6%        
k8s-node02     57m          0%     544Mi           6%

2.5Dashboard部署

Dashboard 是基于网页的 Kubernetes 用户界面。 你可以使用 Dashboard 将容器应用部署到 Kubernetes 集群中，也可以对容器应用排错，还能管理集群资源。 你可以使用 Dashboard 获取运行在集群中的应用的概览信息，也可以创建或者修改 Kubernetes 资源 （如 Deployment，Job，DaemonSet 等等）。 例如，你可以对 Deployment 实现弹性伸缩、发起滚动升级、重启 Pod 或者使用向导创建新的应用。Dashboard 同时展示了 Kubernetes 集群中的资源状态信息和所有报错信息。

1.在Master01节点上操作安装Dashboard

cd /root/k8s-ha-install/dashboard/
kubectl  create -f .

2.在Master01节点上查看Dashboard服务

kubectl get svc -n kubernetes-dashboard
NAME                        TYPE        CLUSTER-IP     EXTERNAL-IP   PORT(S)         AGE
dashboard-metrics-scraper   ClusterIP   10.0.159.210   <none>        8000/TCP        2m6s
kubernetes-dashboard        NodePort    10.0.241.159   <none>        443:31822/TCP   2m6s

3.在谷歌浏览器（Chrome）启动文件中加入启动参数，用于解决无法访问Dashboard的问题

(1)右键谷歌浏览器（Chrome），选择【属性】

(2)在【目标】位置处添加下面参数，这里再次强调一下–test-type --ignore-certificate-errors前面有参数

–test-type --ignore-certificate-errors

4.在Master01节点上查看token值

kubectl -n kube-system describe secret $(kubectl -n kube-system get secret | grep admin-user | awk '{print $1}')

5.打开谷歌浏览器（Chrome），输入https://任意节点IP:服务端口，这里以Master01节点为例

https://192.168.2.97:32636/

6.切换命名命名空间为kube-system，默认defult命名空间没有资源

2.6设置Kube-proxy模式为ipvs

1.在Master01节点上将Kube-proxy改为ipvs模式,默认是iptables

kubectl edit cm kube-proxy -n kube-system

2.在Master01节点上更新Kube-Proxy的Pod

kubectl patch daemonset kube-proxy -p "{\"spec\":{\"template\":{\"metadata\":{\"annotations\":{\"date\":\"`date +'%s'`\"}}}}}" -n kube-system

3.在Master01节点上查看kube-proxy滚动更新情况

kubectl get po -n kube-system | grep kube-proxy
kube-proxy-2kz9g                           1/1     Running   0             58s
kube-proxy-b54gh                           1/1     Running   0             63s
kube-proxy-kclcc                           1/1     Running   0             61s
kube-proxy-pv8gc                           1/1     Running   0             59s
kube-proxy-xt52m                           1/1     Running   0             56s

4.在Master01节点上验证Kube-Proxy模式

curl 127.0.0.1:10249/proxyMode
ipvs

2.7Kubectl自动补全

1.在Master01节点上开启kubectl自动补全

source <(kubectl completion bash) 
echo "source <(kubectl completion bash)" >> ~/.bashrc

2.在Master01节点上为 kubectl 使用一个速记别名

alias k=kubectl
complete -o default -F __start_kubectl k

3.集群可用性验证

1.在Master01节点上查看节点是否正常,确定都是Ready

kubectl get node
[root@k8s-master01 ~]# kubectl get node
NAME           STATUS   ROLES                  AGE    VERSION
k8s-master01   Ready    control-plane,master   2d2h   v1.23.17
k8s-master02   Ready    control-plane,master   2d     v1.23.17
k8s-master03   Ready    control-plane,master   2d     v1.23.17
k8s-node01     Ready    <none>                 2d     v1.23.17
k8s-node02     Ready    <none>                 2d     v1.23.17
[root@k8s-master01 ~]# 

2.在Master01节点上查看所有Pod是否正常,确定READY都是N/N形式的且STATUS 都为Running

3.在Master01节点上查看集群网段是否冲突

(1)在Master01节点上查看SVC网段

kubectl get svc 
NAME              TYPE        CLUSTER-IP     EXTERNAL-IP   PORT(S)           AGE
kubernetes        ClusterIP   10.0.0.1       <none>        443/TCP           2d2h
nginx             NodePort    10.0.25.21     <none>        80:30273/TCP      47h
springboot-demo   NodePort    10.0.115.157   <none>        30000:30001/TCP   45h

(2)在Master01节点上查看POD网段,主要分为两段，一段是因为使用HostNetwork,所以使用宿主机网段；另一段使用POD网段

4.在Master01节点上查看是否正常创建资源

(1)在Master01节点上创建名为cluster-test的deployment

kubectl create deploy cluster-test --image=registry.cn-hangzhou.aliyuncs.com/zq-demo/debug-tools -- sleep 3600

(2)在Master01节点上查看deployment创建情况

kubectl get po
NAME                               READY   STATUS    RESTARTS      AGE
cluster-test-79b978867f-mcqgr      1/1     Running   2 (10m ago)   2d
nginx-85b98978db-vb9gc             1/1     Running   1 (10m ago)   47h
springboot-demo-6d87f66f6b-fxpgj   1/1     Running   1 (10m ago)   45h
springboot-demo-6d87f66f6b-p4tmd   1/1     Running   1 (10m ago)   45h
springboot-demo-6d87f66f6b-tmtkn   1/1     Running   1 (10m ago)   45h

5.在Master01节点上检查Pod 是否能够解析 Service

(1)在Master01节点上解析kubernetes,观察到和上面SVC地址一致

[root@k8s-master01 ~]# kubectl exec -it cluster-test-79b978867f-mcqgr -- bash
(06:53 cluster-test-79b978867f-mcqgr:/)  nslookup kubernetes
Server:		10.0.0.10
Address:	10.0.0.10#53Name:	kubernetes.default.svc.cluster.local
Address: 10.0.0.1

(2)在Master01节点上解析kube-dns.kube-system,观察到和上面SVC地址一致

(06:53 cluster-test-79b978867f-mcqgr:/) nslookup kube-dns.kube-system
Server:		10.0.0.10
Address:	10.0.0.10#53Name:	kube-dns.kube-system.svc.cluster.local
Address: 10.0.0.10

6.每个节点是否能访问 Kubernetes 的 kubernetes svc 443 和 kube-dns 的 service 53

(1)在每台机器上测试访问 Kubernetes 的 kubernetes svc 443

[root@k8s-master02 ~]# curl https://10.0.0.1:443
curl: (60) Peer's Certificate issuer is not recognized.
More details here: http://curl.haxx.se/docs/sslcerts.htmlcurl performs SSL certificate verification by default, using a "bundle"of Certificate Authority (CA) public keys (CA certs). If the defaultbundle file isn't adequate, you can specify an alternate fileusing the --cacert option.
If this HTTPS server uses a certificate signed by a CA represented inthe bundle, the certificate verification probably failed due to aproblem with the certificate (it might be expired, or the name mightnot match the domain name in the URL).
If you'd like to turn off curl's verification of the certificate, usethe -k (or --insecure) option.

(2)在每台机器上测试访问 Kubernetes 的kube-dns 的 service 53

curl 10.0.0.10:53
curl: (52) Empty reply from server

7.Pod 和机器之间是否能正常通讯

(1)在Master01节点上查看pod节点IP

[root@k8s-master01 ~]# kubectl get po -owide
NAME                               READY   STATUS    RESTARTS      AGE   IP              NODE         NOMINATED NODE   READINESS GATES
cluster-test-79b978867f-mcqgr      1/1     Running   2 (16m ago)   2d    172.27.14.201   k8s-node02   <none>           <none>
nginx-85b98978db-vb9gc             1/1     Running   1 (16m ago)   47h   172.17.125.7    k8s-node01   <none>           <none>
springboot-demo-6d87f66f6b-fxpgj   1/1     Running   1 (16m ago)   45h   172.27.14.203   k8s-node02   <none>           <none>
springboot-demo-6d87f66f6b-p4tmd   1/1     Running   1 (16m ago)   45h   172.27.14.204   k8s-node02   <none>           <none>
springboot-demo-6d87f66f6b-tmtkn   1/1     Running   1 (16m ago)   45h   172.17.125.9    k8s-node01   <none>           <none>

(2)在Master01节点上ping测试

[root@k8s-master01 ~]# ping 172.27.14.201
PING 172.27.14.201 (172.27.14.201) 56(84) bytes of data.
64 bytes from 172.27.14.201: icmp_seq=1 ttl=63 time=0.418 ms
64 bytes from 172.27.14.201: icmp_seq=2 ttl=63 time=0.222 ms
64 bytes from 172.27.14.201: icmp_seq=3 ttl=63 time=0.269 ms
64 bytes from 172.27.14.201: icmp_seq=4 ttl=63 time=0.364 ms
64 bytes from 172.27.14.201: icmp_seq=5 ttl=63 time=0.197 ms
^C
--- 172.27.14.201 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4106ms
rtt min/avg/max/mdev = 0.197/0.294/0.418/0.084 ms
[root@k8s-master01 ~]# 

8.检查Pod 和Pod之间是否能正常通讯

(1)在Master01节点上查看default默认命名空间下的Pod
[root@k8s-master01 ~]# kubectl get po -owide
NAME READY STATUS RESTARTS AGE IP NODE NOMINATED NODE READINESS GATES
cluster-test-79b978867f-mcqgr 1/1 Running 2 (19m ago) 2d 172.27.14.201 k8s-node02
nginx-85b98978db-vb9gc 1/1 Running 1 (19m ago) 47h 172.17.125.7 k8s-node01
springboot-demo-6d87f66f6b-fxpgj 1/1 Running 1 (19m ago) 45h 172.27.14.203 k8s-node02
springboot-demo-6d87f66f6b-p4tmd 1/1 Running 1 (19m ago) 45h 172.27.14.204 k8s-node02
springboot-demo-6d87f66f6b-tmtkn 1/1 Running 1 (19m ago) 45h 172.17.125.9 k8s-node01
您在 /var/spool/mail/root 中有新邮件
[root@k8s-master01 ~]#
(2)在Master01节点上kube-system命名空间下的Pod
[root@k8s-master01 ~]# kubectl get po -n kube-system -owide

NAME                                       READY   STATUS    RESTARTS      AGE    IP              NODE           NOMINATED NODE   READINESS GATES
calico-kube-controllers-6f6595874c-rvpbg   1/1     Running   4 (20m ago)   2d1h   172.18.195.8    k8s-master03   <none>           <none>
calico-node-6vwpm                          1/1     Running   2 (20m ago)   2d1h   192.168.2.99    k8s-node01     <none>           <none>
calico-node-b8kfr                          1/1     Running   3 (25m ago)   2d1h   192.168.2.96    k8s-master01   <none>           <none>
calico-node-blqnz                          1/1     Running   2 (20m ago)   2d1h   192.168.2.100   k8s-node02     <none>           <none>
calico-node-hpw8m                          1/1     Running   3 (20m ago)   2d1h   192.168.2.98    k8s-master03   <none>           <none>
calico-node-pbb9c                          1/1     Running   2             2d1h   192.168.2.97    k8s-master02   <none>           <none>
calico-typha-6b6cf8cbdf-4jt8j              1/1     Running   2 (20m ago)   2d1h   192.168.2.99    k8s-node01     <none>           <none>
coredns-65c54cc984-cdksw                   1/1     Running   2 (20m ago)   2d3h   172.18.195.9    k8s-master03   <none>           <none>
coredns-65c54cc984-qb5nz                   1/1     Running   2 (20m ago)   2d3h   172.18.195.7    k8s-master03   <none>           <none>
etcd-k8s-master01                          1/1     Running   3 (21m ago)   2d3h   192.168.2.96    k8s-master01   <none>           <none>
etcd-k8s-master02                          1/1     Running   2 (21m ago)   2d1h   192.168.2.97    k8s-master02   <none>           <none>
etcd-k8s-master03                          1/1     Running   2 (20m ago)   2d1h   192.168.2.98    k8s-master03   <none>           <none>
kube-apiserver-k8s-master01                1/1     Running   7 (20m ago)   2d3h   192.168.2.96    k8s-master01   <none>           <none>
kube-apiserver-k8s-master02                1/1     Running   3 (18m ago)   2d1h   192.168.2.97    k8s-master02   <none>           <none>
kube-apiserver-k8s-master03                1/1     Running   3 (20m ago)   2d1h   192.168.2.98    k8s-master03   <none>           <none>
kube-controller-manager-k8s-master01       1/1     Running   5 (25m ago)   2d3h   192.168.2.96    k8s-master01   <none>           <none>
kube-controller-manager-k8s-master02       1/1     Running   2 (21m ago)   2d1h   192.168.2.97    k8s-master02   <none>           <none>
kube-controller-manager-k8s-master03       1/1     Running   3 (19m ago)   2d1h   192.168.2.98    k8s-master03   <none>           <none>
kube-proxy-258rd                           1/1     Running   1 (20m ago)   2d     192.168.2.99    k8s-node01     <none>           <none>
kube-proxy-7vgnc                           1/1     Running   1 (20m ago)   2d     192.168.2.98    k8s-master03   <none>           <none>
kube-proxy-9gsq5                           1/1     Running   1 (21m ago)   2d     192.168.2.97    k8s-master02   <none>           <none>
kube-proxy-fltdx                           1/1     Running   1 (20m ago)   2d     192.168.2.100   k8s-node02     <none>           <none>
kube-proxy-hc7z9                           1/1     Running   1 (25m ago)   2d     192.168.2.96    k8s-master01   <none>           <none>
kube-scheduler-k8s-master01                1/1     Running   5 (25m ago)   2d3h   192.168.2.96    k8s-master01   <none>           <none>
kube-scheduler-k8s-master02                1/1     Running   2 (21m ago)   2d1h   192.168.2.97    k8s-master02   <none>           <none>
kube-scheduler-k8s-master03                1/1     Running   3 (19m ago)   2d1h   192.168.2.98    k8s-master03   <none>           <none>
metrics-server-5cf8885b66-w9dkt            1/1     Running   1 (20m ago)   2d     172.27.14.205   k8s-node02     <none>           <none>

(3)在Master01节点上进入cluster-test-79b978867f-429xg进行ping测试

[root@k8s-master01 ~]# kubectl exec -it cluster-test-79b978867f-mcqgr -- bash
(07:02 cluster-test-79b978867f-mcqgr:/) ping 192.168.2.99
PING 192.168.2.99 (192.168.2.99) 56(84) bytes of data.
64 bytes from 192.168.2.99: icmp_seq=1 ttl=63 time=0.260 ms
64 bytes from 192.168.2.99: icmp_seq=2 ttl=63 time=0.431 ms
64 bytes from 192.168.2.99: icmp_seq=3 ttl=63 time=0.436 ms
64 bytes from 192.168.2.99: icmp_seq=4 ttl=63 time=0.419 ms
64 bytes from 192.168.2.99: icmp_seq=5 ttl=63 time=0.253 ms
64 bytes from 192.168.2.99: icmp_seq=6 ttl=63 time=0.673 ms
64 bytes from 192.168.2.99: icmp_seq=7 ttl=63 time=0.211 ms
64 bytes from 192.168.2.99: icmp_seq=8 ttl=63 time=0.374 ms
64 bytes from 192.168.2.99: icmp_seq=9 ttl=63 time=0.301 ms
64 bytes from 192.168.2.99: icmp_seq=10 ttl=63 time=0.194 ms
^C
--- 192.168.2.99 ping statistics ---
10 packets transmitted, 10 received, 0% packet loss, time 9217ms
rtt min/avg/max/mdev = 0.194/0.355/0.673/0.137 ms