ActiveMQ 04 Linux下安装

Active MQ 04

Linux下安装

下载

解压

在init.d下建立软连接

ln -s /usr/local/activemq/bin/activemq ./

设置开启启动

chkconfig activemq on

服务管理

service activemq start
service activemq status
service activemq stop

NIO配置

默认配置为tcp，使用的是bio

 <transportConnector name="openwire" uri="tcp://0.0.0.0:61616?maximumConnections=1000&amp;wireFormat.maxFrameSize=104857600"/>

http://activemq.apache.org/configuring-version-5-transports

Nio是基于TCP的

客户端使用连接时也应使用nio

		ActiveMQConnectionFactory connectionFactory = new ActiveMQConnectionFactory("admin","admin","nio://localhost:61617");

Auto + Nio

<transportConnector name="auto+nio" uri="auto+nio://localhost:5671"/>

自动适配协议

OpenWire 可用配置选项

Option	Default	Description
cacheEnabled	true	Should commonly repeated values be cached so that less marshaling occurs?
cacheSize	1024	When cacheEnabled=true then this parameter is used to specify the number of values to be cached.
maxInactivityDuration	30000	The maximum inactivity duration (before which the socket is considered dead) in milliseconds. On some platforms it can take a long time for a socket to die. Therefore allow the broker to kill connections when they have been inactive for the configured period of time. Used by some transports to enable a keep alive heart beat feature. Inactivity monitoring is disabled when set to a value <= 0.
maxInactivityDurationInitalDelay	10000	The initial delay before starting inactivity checks. Yes, the word 'Inital' is supposed to be misspelled like that.
maxFrameSize	MAX_LONG	Maximum allowed frame size. Can help help prevent OOM DOS attacks.
sizePrefixDisabled	false	Should the size of the packet be prefixed before each packet is marshaled?
stackTraceEnabled	true	Should the stack trace of exception that occur on the broker be sent to the client?
tcpNoDelayEnabled	true	Does not affect the wire format, but provides a hint to the peer that TCP_NODELAY should be enabled on the communications Socket.
tightEncodingEnabled	true	Should wire size be optimized over CPU usage?

Transport 可用配置选项

Option Name	Default Value	Description
backlog	5000	Specifies the maximum number of connections waiting to be accepted by the transport server socket.
closeAsync	true	If true the socket close call happens asynchronously. This parameter should be set to false for protocols like STOMP, that are commonly used in situations where a new connection is created for each read or write. Doing so ensures the socket close call happens synchronously. A synchronous close prevents the broker from running out of available sockets owing to the rapid cycling of connections.
connectionTimeout	30000	If >=1 the value sets the connection timeout in milliseconds. A value of 0 denotes no timeout. Negative values are ignored.
daemon	false	If true the transport thread will run in daemon mode. Set this parameter to true when embedding the broker in a Spring container or a web container to allow the container to shut down correctly.
dynamicManagement	false	If true the TransportLogger can be managed by JMX.
ioBufferSize	8 * 1024	Specifies the size of the buffer to be used between the TCP layer and the OpenWire layer where wireFormat based marshaling occurs.
jmxPort	1099	(Client Only) Specifies the port that will be used by the JMX server to manage the TransportLoggers. This should only be set, via URI, by either a client producer or consumer as the broker creates its own JMX server. Specifying an alternate JMX port is useful for developers that test a broker and client on the same machine and need to control both via JMX.
keepAlive	false	If true, enables TCP KeepAlive on the broker connection to prevent connections from timing out at the TCP level. This should not be confused with KeepAliveInfo messages as used by the InactivityMonitor.
logWriterName	default	Sets the name of the org.apache.activemq.transport.LogWriter implementation to use. Names are mapped to classes in the resources/META-INF/services/org/apache/activemq/transport/logwriters directory.
maximumConnections	Integer.MAX_VALUE	The maximum number of sockets allowed for this broker.
minmumWireFormatVersion	0	The minimum remote wireFormat version that will be accepted (note the misspelling). Note: when the remote wireFormat version is lower than the configured minimum acceptable version an exception will be thrown and the connection attempt will be refused. A value of 0 denotes no checking of the remote wireFormat version.
socketBufferSize	64 * 1024	Sets the size, in bytes, for the accepted socket’s read and write buffers.
soLinger	Integer.MIN_VALUE	Sets the socket’s option soLinger when the value is > -1. When set to -1 the soLinger socket option is disabled.
soTimeout	0	Sets the socket’s read timeout in milliseconds. A value of 0 denotes no timeout.
soWriteTimeout	0	Sets the socket’s write timeout in milliseconds. If the socket write operation does not complete before the specified timeout, the socket will be closed. A value of 0 denotes no timeout.
stackSize	0	Set the stack size of the transport’s background reading thread. Must be specified in multiples of 128K. A value of 0 indicates that this parameter is ignored.
startLogging	true	If true the TransportLogger object of the Transport stack will initially write messages to the log. This parameter is ignored unless trace=true.
tcpNoDelay	false	If true the socket’s option TCP_NODELAY is set. This disables Nagle’s algorithm for small packet transmission.
threadName	N/A	When this parameter is specified the name of the thread is modified during the invocation of a transport. The remote address is appended so that a call stuck in a transport method will have the destination information in the thread name. This is extremely useful when using thread dumps for degugging.
trace	false	Causes all commands that are sent over the transport to be logged. To view the logged output define the Log4j logger: log4j.logger.org.apache.activemq.transport.TransportLogger=DEBUG.
trafficClass	0	The Traffic Class to be set on the socket.
diffServ	0	(Client only) The preferred Differentiated Services traffic class to be set on outgoing packets, as described in RFC 2475. Valid integer values: [0,64]. Valid string values: EF, AF[1-3][1-4] or CS[0-7]. With JDK 6, only works when the JVM uses the IPv4 stack. To use the IPv4 stack set the system property java.net.preferIPv4Stack=true. Note: it’s invalid to specify both ‘diffServ and typeOfService’ at the same time as they share the same position in the TCP/IP packet headers
typeOfService	0	(Client only) The preferred Type of Service value to be set on outgoing packets. Valid integer values: [0,256]. With JDK 6, only works when the JVM is configured to use the IPv4 stack. To use the IPv4 stack set the system property java.net.preferIPv4Stack=true. Note: it’s invalid to specify both ‘diffServ and typeOfService’ at the same time as they share the same position in the TCP/IP packet headers.
useInactivityMonitor	true	When false the InactivityMonitor is disabled and connections will never time out.
useKeepAlive	true	When true KeepAliveInfo messages are sent on an idle connection to prevent it from timing out. If this parameter is false connections will still timeout if no data was received on the connection for the specified amount of time.
useLocalHost	false	When true local connections will be made using the value localhost instead of the actual local host name. On some operating systems, such as OS X, it’s not possible to connect as the local host name so localhost is better.
useQueueForAccept	true	When true accepted sockets are placed onto a queue for asynchronous processing using a separate thread.
wireFormat	default	The name of the wireFormat factory to use.
wireFormat.*	N/A	Properties with this prefix are used to configure the wireFormat.

ActiveMQ服务监控 Hawtio

官方网站

https://hawt.io/

部署

独立jar包的形式运行

java -jar

hawtio单程序运行，可以对多个远程ActiveMQ服务器进行监控

嵌入ActiveMQ

• 下载war包
• 复制到webapps下

jetty.xml bean标签下添加

				<bean class="org.eclipse.jetty.webapp.WebAppContext">        <property name="contextPath" value="/hawtio" />        <property name="war" value="${activemq.home}/webapps/hawtio.war" />        <property name="logUrlOnStart" value="true" />  </bean>

ActiveMQ.bat下添加

if "%ACTIVEMQ_OPTS%" == "" set ACTIVEMQ_OPTS=-Xms1G -Xmx1G -Dhawtio.realm=activemq -Dhawtio.role=admins -Dhawtio.rolePrincipalClasses=org.apache.activemq.jaas.GroupPrincipal -Djava.util.logging.config.file=logging.properties -Djava.security.auth.login.config="%ACTIVEMQ_CONF%\login.config" 

JMS消息结构（Message）

Message主要由三部分组成，分别是Header，Properties，Body， 详细如下：

Header	消息头，所有类型的这部分格式都是一样的
Properties	属性，按类型可以分为应用设置的属性，标准属性和消息中间件定义的属性
Body	消息正文，指我们具体需要消息传输的内容。

Header

JMS消息头使用的所有方法：

public interface Message {public Destination getJMSDestination() throws JMSException;public void setJMSDestination(Destination destination) throws JMSException;public int getJMSDeliveryMode() throws JMSExceptionpublic void setJMSDeliveryMode(int deliveryMode) throws JMSException;public String getJMSMessageID() throws JMSException;public void setJMSMessageID(String id) throws JMSException;public long getJMSTimestamp() throws JMSException'public void setJMSTimestamp(long timestamp) throws JMSException;public long getJMSExpiration() throws JMSException;public void setJMSExpiration(long expiration) throws JMSException;public boolean getJMSRedelivered() throws JMSException;public void setJMSRedelivered(boolean redelivered) throws JMSException;public int getJMSPriority() throws JMSException;public void setJMSPriority(int priority) throws JMSException;public Destination getJMSReplyTo() throws JMSException;public void setJMSReplyTo(Destination replyTo) throws JMSException;public String getJMScorrelationID() throws JMSException;public void setJMSCorrelationID(String correlationID) throws JMSException;public byte[] getJMSCorrelationIDAsBytes() throws JMSException;public void setJMSCorrelationIDAsBytes(byte[] correlationID) throws JMSException;public String getJMSType() throws JMSException;public void setJMSType(String type) throws JMSException;
}

消息头分为自动设置和手动设置的内容

自动头信息

有一部分可以在创建Session和MessageProducer时设置

属性名称	说明	设置者
JMSDeliveryMode	消息的发送模式，分为NON_PERSISTENT和PERSISTENT，即非持久性模式的和持久性模式。默认设置为PERSISTENT（持久性）。一条持久性消息应该被传送一次（就一次），这就意味着如果JMS提供者出现故障，该消息并不会丢失； 它会在服务器恢复正常之后再次传送。一条非持久性消息最多只会传送一次，这意味着如果JMS提供者出现故障，该消息可能会永久丢失。在持久性和非持久性这两种传送模式中，消息服务器都不会将一条消息向同一消息者发送一次以上（成功算一次）。	send
JMSMessageID	消息ID，需要以ID:开头，用于唯一地标识了一条消息	send
JMSTimestamp	消息发送时的时间。这条消息头用于确定发送消息和它被消费者实际接收的时间间隔。时间戳是一个以毫秒来计算的Long类型时间值（自1970年1月1日算起）。	send
JMSExpiration	消息的过期时间，以毫秒为单位，用来防止把过期的消息传送给消费者。任何直接通过编程方式来调用setJMSExpiration()方法都会被忽略。	send
JMSRedelivered	消息是否重复发送过，如果该消息之前发送过，那么这个属性的值需要被设置为true, 客户端可以根据这个属性的值来确认这个消息是否重复发送过，以避免重复处理。	Provider
JMSPriority	消息的优先级,0-4为普通的优化级，而5-9为高优先级，通常情况下，高优化级的消息需要优先发送。任何直接通过编程方式调用setJMSPriority()方法都将被忽略。	send
JMSDestination	消息发送的目的地，是一个Topic或Queue	send

JMSDeliveryMode

MessageProducer producer = session.createProducer(topic);
producer.setDeliveryMode(DeliveryMode.NON_PERSISTENT);

JMSExpiration

		//将过期时间设置为1小时（1000毫秒 ＊60 ＊60）producer.setTimeToLive(1000 * 60 * 60);

JMSPriority

producer.setPriority(9);

手动头信息

属性名称	说明	设置者
JMSCorrelationID	关联的消息ID，这个通常用在需要回传消息的时候	client
JMSReplyTo	消息回复的目的地，其值为一个Topic或Queue, 这个由发送者设置，但是接收者可以决定是否响应	client
JMSType	由消息发送者设置的消息类型，代表消息的结构，有的消息中间件可能会用到这个，但这个并不是是批消息的种类，比如TextMessage之类的	client

从上表中我们可以看到，系统提供的标准头信息一共有10个属性，其中有6个是由send方法在调用时设置的，有三个是由客户端（client）设置的，还有一个是由消息中间件（Provider）设置的。

需要注意的是，这里

下一代 ActiveMQ 6？Artemis

为下一代事件驱动的消息传递应用程序提供高性能、无阻塞的体系结构。

• 包含JNDI，具有完整的JMS 1.1 & 2.0客户端实现
• 高可用性共享存储、网络复制能力
• 简单而强大的寻址模型协议
• 灵活的负载均衡分配能力
• 针对低延迟持久性和JDBC的高级日志实现
• 与ActiveMQ 5的高功能奇偶校验，以简化迁移

官方文档：http://activemq.apache.org/components/artemis/migration

• netty
• 自己的存储
• 优化传输流程
• 更高的性能
• 不再把所有的协议转换成openwire

高级使用

JMSCorrelationID

用于消息之间的关联，给人一种会话的感觉

---

JMSReplyTo

发送方可以接受到消息消费确认的地址

ActiveMQ5.10.x 以上版本必须使用 JDK1.8 才能正常使用。

ActiveMQ5.9.x 及以下版本使用 JDK1.7 即可正常使用。

面试题

ActiveMQ如何防止消息丢失？会不会丢消息？

做高可用

死信队列

持久化

ack

消息重投

记录日志

接收（消费）确认

broker负载/限流

如何防止重复消费？

消息幂等处理

map ConcurrentHashMap -> putIfAbsent guava cache

如何保证消费顺序？

queue 优先级别设置

多消费端 ->